SDS-05530 0.55mm Diameter 30mm Length Glued Steel Fiber
The glued steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times continuously) and the strongest anchoring force. It is widely used in industrial floors, mortar reinforcement, shotcrete, tunnel and etc.
The Advantages of SDS-05530 0.55mm Diameter 30mm Length Glued Hooked End Steel Fiber
With good dispersion in concrete;
High toughness and lower thickness;
Integrated, no pores, more efficient;
Compared with traditional concrete, concrete with glued steel fiber is more economical and efficient.
USER'S GUIDANCE
Dosage: This depends on the application and the minimum dosage is 20kg/㎥-70kg/㎥
Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it on a mixing table, dry, and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.
Put the uniformly mixed fiber concrete into the conveyor and transport.
Concrete pouring and laying should be compacted.
The Safety & Packaging of SDS-05530 0.55mm Diameter 30mm Length Hooked End Steel Fiber
Star Smith is a professional steel fiber manufacturer that can offer a wide range of hooked end steel fiber that meets different needs.
Packaging:20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet,24tons per 20’container.
And the pallets should be waterproof, don’t stack pallets on top of each other.
Gloves and eye protection should be used when adding the steel fibers.
For more information about steel fibre rate per kgand steel fiber tensile strength, please feel free to contact us!
Send product request
Other supplier products
Steel Fiber For Bridge | Steel fiber for bridgedeck pavement As bridge deck pavement material and pavement repair material, steel fiber concrete is also a successful field... | |
Steel Fibers For Crack Control | Steel Fibers For Crack Control Why we use steel fiber for cracking control? The steel fiber has a high tensile strength of 1000Mpa, which could... | |
Steel Fibers For Shotcrete | Steel fiber for shotcrete -SFRS Steel fiber reinforced shotcrete(SFRS-steel fiber reinforced shotcrete) is referred to as "steel shotcrete", which... | |
SDS-07560 0.75mm Diameter 60mm Length Hooked End Steel Fiber | This fiber is made of cold-drawn wire. Because of its high tensile strength, good toughness, and low price, it is often used as a substitute for gl... | |
SDS-05035 0.50mm Diameter 35mm Length Glued Steel Fiber | The glued steel fibers are water-soluble with good dispersion in concrete. It is widely used in construction, highway pavement, bridge, tunnel, air... |
Same products
Optical Fiber Splicer | Seller: Shenzhen Puhuixin Tecnhnology Co., Ltd. | Splicing for fiber optic cablefor sale is mainly used for the construction and maintenance of opt... | |
Optical Fiber Patch Cord | Seller: Shenzhen Puhuixin Tecnhnology Co., Ltd. | A fiber patch cord 10 meteris also known as a fibre optic connector, it is a fibre optic cable eq... | |
Mechanical Optical Switch | Seller: Zhongshan Meisu Technolody Co.,Ltd | MEISU's Mechanical Optical Switch is driven by a relay to control the prism to turn, thus switch ... | |
Linear Fiber Array | Seller: Zhongshan Meisu Technolody Co.,Ltd | Products One dimensional linear fiber arrayis made by placing M / MM / PM fibers on a V-grooved ... | |
Lensed Fiber | Seller: Zhongshan Meisu Technolody Co.,Ltd | In some optical application, lens, reflector and other micro-optics components are normally neede... |