SDS-07535 0.75mm Diameter 35mm Length Hooked End Steel Fiber
This fiber is a high-performance steel fiber. Because of its high tensile strength, good toughness, and low price, it is often used as a substitute for glued steel fibers. It can be widely used on roads, highways, curbs, factory floors, airport runways and etc. If you are interested in this kind of SDS 35mm steel fiber, please feel free to contact us.
The Advantages of SDS-07535 0.75mm Diameter 35mm Length Hooked End Steel Fiber
Under the same strength, the amount of concrete can be reduced;
Product life is prolonged;
High comprehensive;
Reduce steel reinforcement requirements;
Hooked end steelfiber can reduce crack widths and control the crack widths tightly, and also improve durability.
USER'S GUIDANCE
Dosage: depending on the application and the minimum dosage is 20kg/㎥-70kg/㎥
Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fiberevenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.
Put the uniformly mixed fiber concrete into the conveyor and transport.
Concrete pouring and laying should be compacted.
The Safety & Packaging of SDS-07535 0.75mm Diameter 35mm Length Hooked End Steel Fiber
Star Smith is a professional steel fiber manufacturer that can offer a wide range of steel fibre types that meets different needs.
Packaging: 20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet, 24tons per 20'container.
And the pallets should be waterproof, don't stack pallets on top of each other.
Gloves and eye protection should be used when adding the steel fibers.
For more information about steel fiber priceand shotcrete steel fibre, please feel free to contact us!
Send product request
Other supplier products
 |
SDS-1823 0.18-0.23mm Diameter 13±1mm Length Copper Micro Steel Fiber | Micro steel fiberare made of copper-coated steel wire. Micro steel fiber wireis one of most important material of RPC and UHPC. UHPC has high st... |
 |
SDS-07560 0.75mm Diameter 60mm Length Hooked End Steel Fiber | This fiber is made of cold-drawn wire. Because of its high tensile strength, good toughness, and low price, it is often used as a substitute for gl... |
 |
SDS Steel Fiber | Tengzhou Star smith Metal Products Co., Ltd. (SDS）is one of the top three steel fiber manufacturerspecializing in steel fiber production in China a... |
 |
Steel Fiber For Bridge | Steel Fiber For Bridge Steel fiber for bridge deck pavement As bridge deck pavement material and pavement repair material, steel fiber concrete... |
 |
Steel Fibers For Durability | Steel Fibers For Durability The tensile strength of SDSsteel fiberreinforced is more than 1150MPa, and it will not be broken when concrete is subj... |
Same products
 |
Optical Fiber Splicer | Seller: Shenzhen Puhuixin Tecnhnology Co., Ltd. | Splicing for fiber optic cablefor sale is mainly used for the construction and maintenance of opt... |
 |
Optical Fiber Patch Cord | Seller: Shenzhen Puhuixin Tecnhnology Co., Ltd. | A fiber patch cord 10 meteris also known as a fibre optic connector, it is a fibre optic cable eq... |
 |
Mechanical Optical Switch | Seller: Zhongshan Meisu Technolody Co.,Ltd | MEISU's Mechanical Optical Switch is driven by a relay to control the prism to turn, thus switch ... |
 |
Linear Fiber Array | Seller: Zhongshan Meisu Technolody Co.,Ltd | Products One dimensional linear fiber arrayis made by placing M / MM / PM fibers on a V-grooved ... |
 |
Lensed Fiber | Seller: Zhongshan Meisu Technolody Co.,Ltd | In some optical application, lens, reflector and other micro-optics components are normally neede... |
