Efficient Ozone Aging Test Chamber
| 1. Technical indexes | |
| 1.1. Temperature range | 25deg C to 65deg C |
| 1.2. Humidity range | 30 to 65%RH |
| 1.3. Temperature uniformity | lesson than or equal to 2deg C（empty load)） |
| 1.4. Humidity uniformity | +2%, -3% RH |
| 1.5. Temperature volatility | +-0.5deg C （empty load)） |
| 1.6. Temperature deviation | +-2deg C |
| 1.7. Temperature increase rate | 0.7 to 1.0deg C/min |
| 1.1. Time setting range | 1 to 9999H |
| 1.8. Ozone Concentration | 50 to 1500pphm |
| 1.9. Gas flow rate | 8 to 16mm/S |
| 1.10. Deviation of ozone concentration | lesson than or equal to +-10% |
| 1.11. Rotary speed of sample shelf | 1r/min |
| 1.12. Extension rate of fixture | 5 to 45% |
Send product request
Other supplier products
 |
pv module uv test chamber | Model Effective Irradiation AreaD Wmm Exterior DimensionD W Hmm LRHS-NF 600x1270 750x1880x800 LRHS-NFX 1820x1000 2500x1400x1500 Lenpure Ph... |
 |
environmental test chamber/rooms | salt spray chamber, ozone aging chamber, temperature test chamber, humidity test chamber, dust test chamber, shock test chamber,UV weather test cha... |
|
|
Lenpure Three Zones Thermal Shock Test Chamber | Temperature Rage -60 deg C to 150 deg C Hot Zone 50 deg C to 200 deg C Cold Zone -60 to 10 deg C Temperature volatility less than +-1 deg ... |
|
|
Efficient Ozone Aging Test Chamber | 1. Technical indexes 1.1. Temperature range 25deg C to 65deg C 1.2. Humidity range 30 to 65%RH 1.3. Temperature uniformity lesson than or ... |
 |
Salt Spray Corrosion Test Chamber | Product Name LENPURE Salt Spray Corrosion Test Chamber Model LRHS-412-RY Dimension of Working Room DxWxH 750mm x 1100mm x500mm Overall Dim... |
Same products
 |
Point Rails Lowering Value Measuring Ruler | Seller: 842518 | The frog vertical wear measuring ruler is used to measure the vertical wear value at any part of ... |
 |
Portable Laser Alignment Device | Seller: 842518 | Laser Alignment Device is used for measuring track level and line to aid track measurement and ha... |
 |
Rail cant measurement device | Seller: 842518 | The main part of the wheel tread is an inward inclination of 1:40 . In order to make the top of t... |
 |
NGM-6.3II Internal Combustion Rail Grinding Machine | Seller: 842518 | This machine is mainly used for the recovery and grinding of welded joints,calendering burrs,rail... |
 |
NCM-5.1 Internal Combustion Turnout Grinding Machine | Seller: 842518 | NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch a... |
