underslung segment launching gantry
Underslung Segmental Launching Gantry
Precast Segmental Method with a segmental Launching Gantry (LG) is a very popular way used for the construction of bridges and viaducts with small curve and long span.
Segmental Launching Gantries are used for erecting Precast Segmental Bridges; for Balance Cantilever Method or Span by Span Method. Launching Gantry can be designed as Under-slung or Overhead Model to meet the site requirements.
Whenever segmental Launching Gantry is use, efficiency is crucial. HUADA Launching Gantries are designed to save every single minute in the construction sequence. Motorized mechanisms are used for continuous self-launching, electric winches with motorized travelling wagons are used for segment lifting and transporting, Spreader Beam with 360° on plane rotating, vertical tilting and angle adjustment functions are provided.
Segmental Launching Gantries are used for erecting Precast Segmental Bridges; for Balance Cantilever Method or Span by Span Method. Launching Gantry can be designed as Under-slung or Overhead Model to meet the site requirements.
Whenever segmental Launching Gantry is use, efficiency is crucial. HUADA Launching Gantries are designed to save every single minute in the construction sequence. Motorized mechanisms are used for continuous self-launching, electric winches with motorized travelling wagons are used for segment lifting and transporting, Spreader Beam with 360° on plane rotating, vertical tilting and angle adjustment functions are provided.
Overhead LG Innovations of HUADA:
◆independent main structures, only connected by the gantry crane, allowing transverse adjustment from single to double and even to triple track.
◆Implementation of hinges on our underslung LG has made it possible to erect spans with a horizontal radius down to 75m.
◆The underslung hydraulic adjustment system permits the whole span to be adjusted in all directions to correct possible misalignments during erection.
◆Underslung LG consist of independent self-supporting main structures combined with advanced lifting equipment, creating an exceptionally flexible system for both the balanced cantilever and the span-by-span method.
◆independent main structures, only connected by the gantry crane, allowing transverse adjustment from single to double and even to triple track.
◆Implementation of hinges on our underslung LG has made it possible to erect spans with a horizontal radius down to 75m.
◆The underslung hydraulic adjustment system permits the whole span to be adjusted in all directions to correct possible misalignments during erection.
◆Underslung LG consist of independent self-supporting main structures combined with advanced lifting equipment, creating an exceptionally flexible system for both the balanced cantilever and the span-by-span method.
Prices vary a lot according to different specifications, please contact for details.
Huada Products
A: Precast Bridge Launching Equipment
1.Beam Launcher
2.Overhead Segmental Launching Gantry
3.Underslung Segmental Launching Gantry
4.Segment Lifter
5.Full Span Launching Gantry
6.Cast in Situ Equipment
7.Overhead Movable Scaffolding System
8.Underslung Movable Scaffolding System
9.Overhead Form Traveller
10.Underslung Form Traveller
B:Casting Yard Equipment
1.Gantry Crane
2.Straddle Carrier
3.Tyre Transporter
4.Mould
C:General Industry Cranes
1.Double Girder Gantry Crane
2.Single Girder Gantry Crane
3.Double Girder Overhead Crane
4.Single Girder Overhead Crane
5.Electric Hoist
D:Port Cranes
1.Marine Hoist
2.Portal Crane
3.Rail Mounted Container Gantry Crane
4.Rubber Tyre Container Gantry Crane
A: Precast Bridge Launching Equipment
1.Beam Launcher
2.Overhead Segmental Launching Gantry
3.Underslung Segmental Launching Gantry
4.Segment Lifter
5.Full Span Launching Gantry
6.Cast in Situ Equipment
7.Overhead Movable Scaffolding System
8.Underslung Movable Scaffolding System
9.Overhead Form Traveller
10.Underslung Form Traveller
B:Casting Yard Equipment
1.Gantry Crane
2.Straddle Carrier
3.Tyre Transporter
4.Mould
C:General Industry Cranes
1.Double Girder Gantry Crane
2.Single Girder Gantry Crane
3.Double Girder Overhead Crane
4.Single Girder Overhead Crane
5.Electric Hoist
D:Port Cranes
1.Marine Hoist
2.Portal Crane
3.Rail Mounted Container Gantry Crane
4.Rubber Tyre Container Gantry Crane
Send product request
Other supplier products
railway suspension bridge erecting beam launcher crane 180t 200t | railway suspension bridge erecting beam launcher crane 180t 200tis used in the erection of precast beam bridges for span by span method of construc... | |
Rich exporting experience mobilizable/fixed portal slewing crane shipyard crane | Product Description Product Application Rich exporting experience mobilizable/fixed portal slewing crane shipyard crane, such as loading and... | |
Factory price 450 ton highway railway mobile rubber tyred gantry cranes | Product Description Factory price 450 ton highway railway mobile rubber tyred gantry cranes with diesel engine AC generator power supply, within t... | |
technical 1300T segmental launching gantry manufacturer | Product Description 1300T segmental launching gantry The 1300T segmental launching gantry is used to construct prefabricated spans up to 60m long. ... | |
highway bridge hanging basket form traveller | highway bridge hanging basket form traveller Form Traveler is used Balance Cantilever Construction Method. highway bridge hanging basket form trave... |
Same products
Point Rails Lowering Value Measuring Ruler | Seller: 842518 | The frog vertical wear measuring ruler is used to measure the vertical wear value at any part of ... | |
Portable Laser Alignment Device | Seller: 842518 | Laser Alignment Device is used for measuring track level and line to aid track measurement and ha... | |
Rail cant measurement device | Seller: 842518 | The main part of the wheel tread is an inward inclination of 1:40 . In order to make the top of t... | |
NGM-6.3II Internal Combustion Rail Grinding Machine | Seller: 842518 | This machine is mainly used for the recovery and grinding of welded joints,calendering burrs,rail... | |
NCM-5.1 Internal Combustion Turnout Grinding Machine | Seller: 842518 | NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch a... |