H Beam Shot Blasting Machines for Surface Cleaning

• 

JX H are automatically table roller continually passing type. This type of machine is especially used for steel H beam surface cleaning and strengthening, to get a certain degree of surface roughness, to add paint adhesion force, to improve surface quality and to enhance anti-corrosive effects. There is a shot blasteron eachside of the shot blasting room. They are assembled in the best position according to the H beam condition.

Technical Parameters:

1. BlastChamberOpenSize: 2500mm—1200mm2.Rollerconveyingsystem 1) Workingspeed m/min :0.5-4 2) Power :kw 4x23. Blastingnozzles1) Model: Q034H2) Shotblastingvolume: kg/min 250—103) Power: kw 15—104) Quantity:Set 104. Portrait&horizontal screw conveyor1) PortraitDeliverycapacity: t/h 1502)Power: kw 7.5 3) Horizontaldeliverycapacity: t/h 150 4)Power: kw 5.55.Bucket elevator1) Liftingcapacity: t/h 150 2) Power: kw 116.Separator1)Separatingcapacity:t/h1502) Airspeedinseparatingarea:m/s4~53)Power: kw5.57.Dust collectorsystemPulsecartridge dust collector Quantity:set 28. ReverseBlower1) Airvolume: m3/h 9000X22) Power: kw 18.5+119.LiftingsystemforcleaningBrush1) Liftingdistance: mm 0~12002) power: kw 2.2x23) CleaningBrush4)Diameterofbrush: mm 6005) power: kw 3Total power: kw 263Total air volume: m3/h 38000

This machine is not a standard machine, any parameters can be customized according clients' requirements, so any further information please contact with us, our skilled engineer team will give you the most professional and cost-effective solutions.

Machine Details:The steel shots blasted by blasting turbines will be collected and purified by the shots circle system, and then continue to be used again by blasting turbines.The process flow of the shots circle system: Steel shots blasted by blasting turbines will be collected by the portrait screw conveyor and delivered to the bucket elevator. Finally, the bucket elevator will lift them to the air wash type separator.After separating, the dust and broken steel shots will be removed from steel shots and good steel shots will enter the storage bin.

Other supplier products

	Rotary Table Shot Blasting Machine	The rotary table shot blasting machineis widely used in the surface cleaning and strengthening for iron, steel, forging and welding parts. It is mo...
	Rail Steel Grit	Quality Control: Density: >7.5g/cm3. Hardness(±3HRC): HRC40-51, HRC50-60, HRC61-65. Chemical Composition: C 0.65-1.0%, Si 0.15-0.8%, Mn 0...
	Air Blasting Room	Critical Components: The chamber, dust collection ,abrasive recovery, abrasives recycling, and blasting equipment. The main feature of an air blast...
	Swing Table Shot Blasting Machine for Iron	Swing Table Shot Blasting MachineSupplier JX Abrasives Provides Swing Table Shot Blasting Machine for Iron, Steel, Forging Parts Deburring, Deflash...
	Multiclone Dust Collector	China Multiclone Dust CollectorFactory JX Offers Multiclone Dust Collector Consists Of Several Small-diameter Cyclones, More Efficient Than Single ...

Same products

	protective clothing Antisynthetic blood penetration tester	Seller: Qinsun Instruments Co., Ltd	It is applicable to the resistance of the protective clothing to the synthetic blood penetration ...
	Respirator Fit Tester	Seller: Qinsun Instruments Co., Ltd	The Protective Mask Leak Tester is a portable device designed to detect the service performance a...
	Floor coverings flammability tester	Seller: Qinsun Instruments Co., Ltd	Applications:TheFlammability Test Chamberis used to test the effects of a small source of ignitio...
	Cantilever Fabric Stiffness Tester	Seller: Qinsun Instruments Co., Ltd	Application: Fabric Stiffness Tester, is a practical equipment to determine the bending height, ...
	Automatic Wrinkle Recovery Tester	Seller: Qinsun Instruments Co., Ltd	The main principle of the wrinkle recovery tester is to apply a predetermined pressure to the spe...