H Beam Shot Blasting Machines for Surface Cleaning

JX H are automatically table roller continually passing type. This type of machine is especially used for steel H beam surface cleaning and strengthening, to get a certain degree of surface roughness, to add paint adhesion force, to improve surface quality and to enhance anti-corrosive effects. There is a shot blasteron eachside of the shot blasting room. They are assembled in the best position according to the H beam condition.

Technical Parameters:

1. BlastChamberOpenSize: 2500mm—1200mm2.Rollerconveyingsystem 1) Workingspeed m/min :0.5-4 2) Power :kw 4x23. Blastingnozzles1) Model: Q034H2) Shotblastingvolume: kg/min 250—103) Power: kw 15—104) Quantity:Set 104. Portrait&horizontal screw conveyor1) PortraitDeliverycapacity: t/h 1502)Power: kw 7.5 3) Horizontaldeliverycapacity: t/h 150 4)Power: kw 5.55.Bucket elevator1) Liftingcapacity: t/h 150 2) Power: kw 116.Separator1)Separatingcapacity:t/h1502) Airspeedinseparatingarea:m/s4~53)Power: kw5.57.Dust collectorsystemPulsecartridge dust collector Quantity:set 28. ReverseBlower1) Airvolume: m3/h 9000X22) Power: kw 18.5+119.LiftingsystemforcleaningBrush1) Liftingdistance: mm 0~12002) power: kw 2.2x23) CleaningBrush4)Diameterofbrush: mm 6005) power: kw 3Total power: kw 263Total air volume: m3/h 38000

This machine is not a standard machine, any parameters can be customized according clients' requirements, so any further information please contact with us, our skilled engineer team will give you the most professional and cost-effective solutions.

Machine Details:The steel shots blasted by blasting turbines will be collected and purified by the shots circle system, and then continue to be used again by blasting turbines.The process flow of the shots circle system: Steel shots blasted by blasting turbines will be collected by the portrait screw conveyor and delivered to the bucket elevator. Finally, the bucket elevator will lift them to the air wash type separator.After separating, the dust and broken steel shots will be removed from steel shots and good steel shots will enter the storage bin.

Other supplier products

	Angular Bearing Steel Grit	Quick Details: Density: >7.4g/cm3. Hardness: ≥HRC62. Chemical Composition: C 0.85-1.10%, Mn 0.25-0.45%, Cr 0.8-1.65%, S≤0.04%, P≤0.04%....
	Steel Pipe Shot Blasting Machine	Steel PipeShot Blasting MachineKey Specifications / Features JX abrasives manufactures fully automated upblast or downblast steel Pipe Machines for...
	Hanger Shot Blasting Machine for Forging Parts	Forging Parts Blasting MachineCompany JX Abrasives Offers Hanger Type Shot Blasting Machine for Cleaning Castings, Forging Parts, Heat Treated Part...
	Rotary Table Shot Blasting Machine	The rotary table shot blasting machineis widely used in the surface cleaning and strengthening for iron, steel, forging and welding parts. It is mo...
	Wire Rod Coil Shot Blasting Machine	Wire Rod Coil Blasting MachineSupplier JX Abrasives Provides Wire Rod Coil Shot Blasting Machine, Consist of Shot Blast Cleaning Room, Dust Remover...

供应产品

Same products

	XD-MAX Winch for Drone	卖方: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD	XD-MAX Winch for Drone The XD-MAX Winch for Droneis a high-performance aerial lifting solution d...
	XD-55 Winch for Drone	卖方: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD	XD-55 Winch for Drone Introducing the XD-55 Winch for Drone—an advanced lifting system eng...
	XD-10 Winch for Drone	卖方: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD	XD-10 Winch for Drone SAFE, EFFICIENT AND CONVENIENT.Your reliable and intelligent air transport...
	Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series	卖方: Uratech USA Inc	TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m...
	Uratech Tool scoot cart for 50 taper tool holders	卖方: Uratech USA Inc	Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so...