LH MVR Falling Film Evaporator
Main features of falling film evaporator:
The feed liquid is added from the top of the evaporator and flows along the tube wall under the action of gravity, and in the process, the solvent is continuously evaporated so that the solute concentration is increased, and the finishing liquid is obtained at the bottom of the heat exchanger. The compressed steam enters the MVR compressor. After the compressor is compressed, the pressure rises and the temperature rises. As a new heat source, the material that needs to be evaporated is heated. MVR falling film evaporator is mainly composed of preheater, separator, vacuum system, MVR compressor, control system and cleaning system.
MVR falling film evaporator product advantages:
- The evaporation temperature is low, the minimum can be controlled at 45-55 degrees C, no foaming, no running, high evaporation efficiency.
- The heat transfer temperature difference is small, can achieve moderate evaporation, hard coke, very suitable for heat sensitive materials.
- The material with high evaporation concentration and large viscosity (0.05-0., 45Pa*s) has a film like flow with little loss of temperature difference.
- The utility model has the advantages of simple structure, continuous operation, safe and reliable operation, and no need of a steam condenser.
- The equipment is equipped with CIP automatic cleaning pipeline, and the equipment is precise and precise, with no residue and no dead ends.
- No leakage or zero emission can be achieved by evaporating and concentrating ethanol solution.
Please contact LH Evaporator to get more product details information.
Send product request
Other supplier products
 |
LH MVR Falling Film Evaporator | Main features of falling film evaporator: The feed liquid is added from the top of the evaporator and flows along the tube wall under the action... |
