IBOP For Top Drive
IBOP for top drive can be divided into Upper IBOP and Lower IBOP, they are control valves which are used with the top drive system. Usually the two valves connected to the top drive drilling device. The IBOP adopts high reliable metal seal. So it can bear high pressure upward and downward. The working pressure can be achieved 10000 psi or 15000 psi. When well kick occurring, the upper IBOP can be closed by remote controlled, but the lower IBOP will be closed manually. Actuator for top drive is a subsidiary body which controls open and close of Upper IBOP. It works with other accessories of the rig, so that control opening and closing of Upper IBOP on any height of derrick driller console. Both the valve body cavity and accessories have special anti-corrosive processing, so that prolong the working life.
Specification ofIBOP For Top Drive
|
Model |
OD mm(inch) |
ID mm(inch) |
OAL mm(inch) |
Conn. |
|
STJ03M |
187(7 23/64) |
78(3 5/64) |
572(22 33/64) |
6 5/8REG BOX &BOX |
|
STJ03J |
187(7 23/64) |
78(3 5/64) |
523(20 19/32) |
6 5/8REG BOX &PIN |
|
DQFP187-3C |
187(7 23/64) |
76.2(3) |
572(22 33/64) |
6 5/8REG BOX &BOX |
|
DQFP187-4 |
187(7 23/64) |
76.2(3) |
523(20 19/32) |
6 5/8REG BOX &PIN |
|
DQFP187-9 |
187(7 23/64) |
78 (3 5/64) |
523(20 19/32) |
6 5/8REG BOX &PIN |
|
DQFP187-10 |
187(7 23/64) |
78 (3 5/64) |
572(22 33/64) |
6 5/8REG BOX &PIN |
|
DQFP190-1 |
190(7 31/64) |
76.2(3) |
547(21 17/32) |
6 5/8REG BOX &PIN |
|
DQFP196-1 |
195.8(7 45/64) |
78 (3 5/64) |
572(22 33/64) |
6 5/8REG BOX &BOX |
|
DQFP196-2 |
195.8(7 45/64) |
78 (3 5/64) |
523(20 19/32) |
6 5/8REG BOX &PIN |
|
DQFP197-5C |
197(7 3/4) |
76.2(3) |
572(22 33/64) |
6 5/8REG BOX &BOX |
|
DQFP197-6B |
197(7 3/4) |
76.2(3) |
536(21 7/64) |
6 5/8REG BOX &PIN |
|
DQFP197-3 |
197(7 3/4) |
78 (3 5/64) |
584(23) |
6 5/8REG BOX &PIN |
|
DQFP197-4 |
197(7 3/4) |
78 (3 5/64) |
512(20 5/32) |
6 5/8REG BOX &PIN |
|
DQFP200-2 |
200(7 7/8) |
76.2(3) |
547(21 11/32) |
6 5/8REG BOX &PIN |
|
DQFP216-1 |
216(8 1/2) |
78 (3 5/64) |
600(23 5/8) |
6 5/8REG BOX &PIN |
|
DQFP216-2 |
216(8 1/2) |
78 (3 5/64) |
533(20 63/64) |
6 5/8REG BOX &PIN |
|
DQFP216-4 |
216(8 1/2) |
76.2(3) |
603(23 47/64) |
6 5/8REG BOX &PIN |
|
SDX254-3 |
254(10) |
105(4 9/64) |
596(23 15/32) |
6 5/8REG BOX &PIN |
WEB:
COMPANY:XI'AN SCOTON OILFIELD EQUIPMENT CO., LTD
TEL:
Send product request
Other supplier products
 |
Multi-cycle Circulating Subs | Description of Multi-cycle Circulating Subs The multi-cycle circulating subis the company's own research and development of new products,The multi... |
|
|
IBOP For Top Drive | IBOP for top drive can be divided into Upper IBOP and Lower IBOP, they are control valves which are used with the top drive system. Usually the two... |
 |
Decanter Centrifuge | LW series decanting centrifuge is the fourth class solids control equipment in well drilling solids control. Using decanter principle to separate s... |
 |
Marine Casing Cutter | Description of Marine Casing Cutter Marine Casing cutter is one of tools which cuts the casing internally. It uses water horsepower to drive cutte... |
 |
Reamer Shoe | Reamer shoes overcome wellbore obstructions and guide the casing or liner to total depth.Our reamer shoe designs use an eccentric guide nose to n... |
Same products
 |
protective clothing Antisynthetic blood penetration tester | Seller: Qinsun Instruments Co., Ltd | It is applicable to the resistance of the protective clothing to the synthetic blood penetration ... |
 |
Respirator Fit Tester | Seller: Qinsun Instruments Co., Ltd | The Protective Mask Leak Tester is a portable device designed to detect the service performance a... |
 |
Floor coverings flammability tester | Seller: Qinsun Instruments Co., Ltd | Applications:TheFlammability Test Chamberis used to test the effects of a small source of ignitio... |
 |
Cantilever Fabric Stiffness Tester | Seller: Qinsun Instruments Co., Ltd | Application: Fabric Stiffness Tester, is a practical equipment to determine the bending height, ... |
 |
Automatic Wrinkle Recovery Tester | Seller: Qinsun Instruments Co., Ltd | The main principle of the wrinkle recovery tester is to apply a predetermined pressure to the spe... |
