Light Gauge Slitting Lines
RISHBIN Light Gaugesheet metal slitter machinefor pre-painted/coated coils, max. thickness of up to 3mm, max. width of up to 2200mm, and speed of up to 300 m/min. It consists of Decoiler with coil car, guiding & pinch device, high precision slitters, dual head/quick tooling change for slitter is available, scrap winder, side-guiding device, looping, tension device, recoiler. Different materials could be suitable to be processed in the metal slitter line, such as pre-painted steel coil, cold rolled steel coil, hot rolled carbon steel coil, stainless steel coil, copper, brass, aluminum and titanium. These products are for roll mill, HF tube mill, cold forming machines, punching & press machines etc.
To help you achieve your own production capacity target, RISHBINSlitter supplies many options, such as high-speed slitting, medium speed slitting, sheet metal slitter machine, etc. All slitting line machines are easy to operate. They are very reliable, steady performers for both short and long terms running productions.
The thickness can range from the thinnest down to 0,10 mm, to the thickest up to 3 mm
Strip Width, from the narrowest 400 mm to the widest 2200 mm
Coils Weight, up to 30 tons
Line Speed, up to 300 m/min.
Operator Safety.
Highest Production Outcome
Ease of Operation and Maintenance
Working procedure ofLight Gauge Slitting Lines
In the beginning, the coil is loaded on the coil car by crane and brought to the uncoiler by operating the coil car. Coil car centralizes the coil with the uncoiler mandrel and the coil is mounted on the uncoiler. Mandrel is expanded. Snubber roll rotates the coil. Peeler breaks the straps and brings the pre end upto Pinch roll. The Pinch roll drives the coil end upto the slitter. Then its drive is disconnected. Slitter moves the slitted strips further. Slitted strips are threaded through loop table and drag tensioner into the recoiler drum. Recoiler winds one turn on loose coil.
Then drag tensioner and loop are put into operation. Slitter and recoiler run simultaneously in synchronization. As the coil build up, the recoiler rpm correspondingly goes down to keep desired constant line speed. This process goes on until the end of coil on uncoiler. The slitted coil is pushed on the exit coil car through a pusher plate operated by hydraulic cylinder. The side slitted scrap is wound on the scrap winder units provided on both sides of the slitter.
Send product request
Other supplier products
 |
Medium Gauge Slitting Lines | RISHBIN Medium Gauge Slitters is used to slit the big rolls into narrow rolls, and packaging it automatically. It works of max. thickness up to 10m... |
 |
Rotary Shear Cut To Length Lines | Rotary Shear Lines are mainly used for CR, S.S, Al material, precision leveling and cutting products. This line special advantage is non-stop cutti... |
 |
Stainless Steel Slitting Machine | Are you looking for a professional steel slitting machine manufacturer? Based on much experiences on providing quality, cost-effective and long las... |
|
|
Stainless Steel Slitting Machine | Based on much experiences on providing quality, cost-effective and long lasting roll forming systems Classification and Characteristics of Stainles... |
 |
Copper Slitting Line | Based on much experiences on providing quality, cost-effective and long lasting roll forming systems Cutting Principle for the selection of the Sl... |
Same products
 |
XD-MAX Winch for Drone | Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-MAX Winch for Drone The XD-MAX Winch for Droneis a high-performance aerial lifting solution d... |
 |
XD-55 Winch for Drone | Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-55 Winch for Drone Introducing the XD-55 Winch for Drone—an advanced lifting system eng... |
 |
XD-10 Winch for Drone | Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-10 Winch for Drone SAFE, EFFICIENT AND CONVENIENT.Your reliable and intelligent air transport... |
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | Seller: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | Seller: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
