HM-100 High-temperature Hygronom
Overview
Hygronom is also called moisture meter or dew-point meter, which is used to measure the humidity of flue gas emitted by pollution source. According to measured humidity, it converts wet gas concentration into dry gas concentration. In addition, it also can be used in industrial online humidity monitoring.
HM-100 gas moisture meteris equipped with an internal high-precision capacitance digital temperature & humidity sensor. The installation method adopts the in-situ immersion installation. It is a self-developed product, of which, the core component is from Switzerland. Put the sensor inside stack to get in touch with flue gas. The probe needs preheating to prevent gas from condensation, which will affect the measurement of moisture in the flue gas. After gas contacts with the measurement chip, the chip will change capacitance to measure flue gas concentration.
Features Of HM-100 High-temperature Hygronom
• The product is convenient for installation, disassembly, and cleaning with small and compact structure
• Direct and simple key operation on site
• The probe is equipped with heat tracing function to prevent condensate water from damaging humicap and thermal resistance
• Imported core components with high-performance index and reliability
Technical Parameter Of HM-100 High-temperature Hygronom
|
Measurement Range |
H2O: 0~40.00%(volume percent)(optional) |
|
Humidity sensor |
Resistance-capacitance |
|
Temp sensor |
Pt100 platinum resistor |
|
Accuracy |
0 ～ 40.00% H2O: ± 2% |
|
Repeatability |
0 ～ 40.00% H2O: ± 1% |
|
Stability |
0 ～ 40.00% H2O: ± 1% FS / 7d |
|
Response time |
T90 ＜ 6s |
|
Sensor life |
＞2 years (under normal use) |
|
Transmitter life |
＞5 years (under normal use) |
|
Power supply |
220VAC |
|
Instrument weight |
About 10kg |
|
Power consumption |
Maximum about 35VA (heating) |
|
Ambient temperature |
Transmitter: -10°C～+55°C |
|
Probe: 0～180°C (except probe cable) |
|
|
Ambient humidity |
＜95%RH |
|
Sample gas flow |
(2 ~ 6) L / min |
|
Analog output (2 sets) |
Temperature and humidity, 4-20mA |
|
Communication |
Rs232 (standard) |
Typical Application Of HM-100 High-temperature Hygronom
Send product request
Other supplier products
 |
DMS-100/MS-1000 Dust Monitor | Overview Of DMS-100/MS-1000 DMS100/MS-1000 is a self-developed online dust analysis product and a dust particle measuring device, adopting laser b... |
 |
DPM-6000 PM Monitor PM2.5/PM10 | Overview Inhalable particle content is one of the most important indexes for measuring air quality. Combining years of experience in developing env... |
 |
WDet-5000UVI Immersion UV Water Analyzer | HANGZHOU CHUNLAI (ZETIAN) TECHNOLOGY was established in 2008, and has national wide impact in China now as a fast-growing company specialized in en... |
 |
AM-5100 SO2 Analyzer | Overview AM-5100 SO2 analyzer adopts ultraviolet fluorescence technique and combines advanced micro processing technology, which could provide accu... |
 |
Water Quality Analyzers | Hangzhou Zetian Technology Co., Ltd. is the only domestic company with device for measuring water quality device used to measure water qualityequip... |
Same products
 |
Step Drill | Seller: SINOLITE TOOLS LTD. | Step Drill Step Drill Bits | Step Drill Bit Set Supplier & Wholesale Step drill bitsare a s... |
 |
Twist Drill | Seller: SINOLITE TOOLS LTD. | Twist Drill Precision Twist Drill Bits | HSS, Cobalt & Carbide Drills Precision twist drill... |
 |
Metal Cutting Tools | Seller: SINOLITE TOOLS LTD. | Metal Cutting Tools Metal Cutting Power Tools & Cutting Tools for Metal | Sinolite Looking ... |
 |
Taper Shank Drill | Seller: SINOLITE TOOLS LTD. | Taper Shank Drill Taper Shank Drill Bits | HSS Taper Shank Drills Supplier Taper shank drill bi... |
 |
Traditional Welding in Furniture Manufacturing | Seller: Traditional Welding in Furniture Manufacturing | Traditional Welding in Furniture Manufacturing Pain Points of Traditional welding operat... |
