Medium Gauge Cut To Length Lines
Cut To Length line is a high efficient metal processing production line for cutting metal flat sheet from metal coils. The metal coils unwind, leveled, cut to length and blanking. RISHBIN supply full range of cut to length line machine according to client’s special requirement by combining different component. Every CTL line is engineered and constructed differently for customers, it is customized designed and built, it is considered when choosing a right CTL line about some specifics like production capacity, running speed, material thickness and width, etc. Quality and standard checks are strictly performed on our product before releasing to our valued customers.
Available raw material for cut to length machine is hot rolled steel, cold rolled steel, galvanized steel, pre-painted steel, high tensile steel, stainless steel, aluminum, copper, alloys in cut to length line manufacturers.
Main Technical Parameters of Medium Gauge Cut To Length Lines
RISHBIN, as one of the cut to length machine manufacturers, medium gauge cut-to-length lines are built for speed and ease of use and can produce higher line speeds without experiencing material slippage. Medium gauge lines are also capable of processing surface critical material without marking. Cut-To-Length Line and Blanking Line will make your job easier, cut costs, and increase your profits.
The lines can be supplied with start-stop shears, flying shears or continuous direct feed. Edge trimming may be incorporated.
Here is working process:
Steel coils are transferred by an entry coil car and loaded onto an uncoiler. From uncoiler the strip proceeds through a five-high precision leveler designed to level steel within the desired material gauge range and yield strength. The strip then proceeds through a squaring unit and precision roll-feed unit to the high speed shear, where it is cut to required length. The cut sheet then moves to float sheet stacker where it is stacked on a pallet and is then moved onto the semiautomatic packaging line for wrapping.
Benefits of RISHBIN Cut to Length lines
Minimal tooling preparations and higher productivity rates
Energy efficient
Reduced operating costs
High in speed and strength
High input and output rates
Extreme sheet flatness due to high precision levelers
Exact cutting accuracy
|
Type |
RS6×2000 |
RS8×2000 |
RS10×2200 |
RS2×2200 |
RS16×2200 |
|
Thickness Range (mm) |
1-6 |
2-8 |
2-10 |
3-12 |
4-16 |
|
Width Range (mm) |
2000 |
2000 |
2200 |
2200 |
2200 |
|
Cutting Length (mm) |
500-6000 |
600-8000 |
600-10000 |
800-12000 |
800-12000 |
|
Cutting Precision (mm) |
±0.5 |
±1 |
±1 |
±1 |
±1 |
|
Roller Numbers |
15 |
13 |
13 |
11 |
11 |
|
Roller Diameter |
F140 |
F155 |
F160 |
F180 |
F200 |
|
Coil ID Linear Speed |
Ф508&610mm 0~28m/min or 0-60m / min |
Ф&610&760mm 0~28m/min or 0-60m / min |
Ф610&760mm 0 ~ 28m / min |
Ф610&760mm 0 ~ 28m / min |
Ф610&760mm 0 ~ 28m / min |
Rishbin was founded in 1999. With almost twenty years development, now it becomes a leading professional supplier in the field of stainless steel slitting machineindustry, and exports its quality production line to the markets all over the world.We sincerely invite and welcome people from all around the world to invest and create more values together.
Send product request
Other supplier products
 |
Medium Gauge Slitting Lines | RISHBIN Medium Gauge Slitters is used to slit the big rolls into narrow rolls, and packaging it automatically. It works of max. thickness up to 10m... |
 |
Heavy Gauge Slitting Lines | RISHBIN Heavy Gauge Slitting lineare designed to slit high strength heavy gauge materials. Coils max. thickness of up to 20mm, max. width of up to ... |
|
|
Steel Sheet Slitting Machine | Based on much experiences on providing quality, cost-effective and long lasting roll forming systems Metal steel sheet slitting machine main types:... |
|
|
Stainless Steel Slitting Machine | Based on much experiences on providing quality, cost-effective and long lasting roll forming systems Classification and Characteristics of Stainles... |
 |
Rotary Shear Cut To Length Lines | Rotary Shear Lines are mainly used for CR, S.S, Al material, precision leveling and cutting products. This line special advantage is non-stop cutti... |
Same products
 |
XD-MAX Winch for Drone | Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-MAX Winch for Drone The XD-MAX Winch for Droneis a high-performance aerial lifting solution d... |
 |
XD-55 Winch for Drone | Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-55 Winch for Drone Introducing the XD-55 Winch for Drone—an advanced lifting system eng... |
 |
XD-10 Winch for Drone | Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-10 Winch for Drone SAFE, EFFICIENT AND CONVENIENT.Your reliable and intelligent air transport... |
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | Seller: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | Seller: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
