Rotary Shear Cut To Length Lines
Rotary Shear Lines are mainly used for CR, S.S, Al material, precision leveling and cutting products. This line special advantage is non-stop cutting which avoid micro – indentation by stopping to cut. It is applicable for high precision aluminum plate, mirror S.S plate, etc., with short cutting length product.
It consists of Uncoil, Leveling and Cross Cutting metal strip as set length and proper blanking system; Compared with stop cutting to length line, rotary shear line can achieve cutting the plates without stop feeding, higher speed, better accuracy and surface protection. Every of these functions are accomplished by our machines which are designed to cope with an impressive variety of material features ranging.
Material thickness ranging from 0, 2 mm to 3 mm.
Maximum strip width 1800 mm
Maximum sheet length 8000 mm
Tensile strength 1200 N/mm2
Other functions are available to the customer’s needs such as Edge Trimming, Balling or Chopping of scrap edges from strip, Paper and Plastic Film interleaving and many more. Our CTL are designed to comply with the highest demand in quality and production output with care to safety for operators and ease of maintenance.
This rotary shear cut to length line can shear 150 sheets per minute, with maximum running speed of 80 m/min. It uses six-fold multi-roll leveling machine, so the sheet is flat without any marks.
The Rotary shear machine is driven by servo motor, with high shearing precision; double-station stacking, high efficiency and high speed.
The flying shearing line is applied to machine cold-rolled carbon steel, silicon steel, tinplate, stainless steel and surface-coated metal materials.
Rotary Shear Machine-Technical Parameter
|
Parameters/Model |
Processing Thickness(mm) |
Processing Width(mm) |
Cutting Accuracy(mm) |
|
Uncoiling Weight(ton) |
|
|
RS-2x650 |
100-650 |
±0.3 |
80 |
150 |
5 |
|
|
RS-2x800 |
100-800 |
±0.3 |
80 |
150 |
8 |
|
|
RS-2x1300 |
400-1300 |
±0.3 |
80 |
150 |
15 |
|
|
RS-2x1600 |
400-1600 |
±0.3 |
80 |
150 |
20 |
|
|
RS-3x800 |
100-800 |
±0.3 |
70 |
150 |
8 |
|
|
RS-3x1300 |
400-1300 |
±0.3 |
70 |
150 |
15 |
|
|
RS-3x1600 |
400-1600 |
±0.3 |
70 |
150 |
20 |
Rotary Shear CTL Features
Precision Corrective Leveler
Precision Rotary Shear with automated gap adjustment
High capacity Indexing Servo Stacker
Line speeds up to 80 mpm
Minimum cut-to-Length tolerances
Eliminates looping-pit resulting in a more compact line and more space for inventory
Lower foundation and installation costs
Lower delivery time
Best flat sheets
Retrofit your existing start/stop line with Precision Rotary Shear
Twin expanding mandrel uncoiler
Five roll leveler
Fully automatic sheet stacker
Multiple side and end discharge and storage conveyors
Rishbin was founded in 1999. With almost twenty years development, now it becomes a leading professional supplier in the field of cold rolled steel slitting lineindustry, and exports its quality production line to the markets all over the world.We sincerely invite and welcome people from all around the world to invest and create more values together.
Send product request
Other supplier products
 |
Heavy Gauge Cut To Length Lines | Cut To Length lineChinais a high efficient metal processing production line for cutting metal flat sheet from metal coils. The metal coils unwind, ... |
|
|
Steel Slitting Line/Machine | Based on much experiences on providing quality, cost-effective and long lasting roll forming systems Operating Procedure of Preparatory work befor... |
|
|
Heavy Gauge Slitting Lines | RISHBIN Heavy Gauge Slitting lineare designed to slit high strength heavy gauge materials. Coils max. thickness of up to 20mm, max. width of up to ... |
|
|
Light Gauge Slitting Lines | RISHBIN Light Gaugesheet metal slitter machinefor pre-painted/coated coils, max. thickness of up to 3mm, max. width of up to 2200mm, and speed of u... |
|
|
Light Gauge Cut To Length Lines | Cut To Length linefor saleis a high efficient metal processing production line for cutting metal flat sheet from metal coils. The metal coils unwin... |
Same products
 |
XD-MAX Winch for Drone | Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-MAX Winch for Drone The XD-MAX Winch for Droneis a high-performance aerial lifting solution d... |
 |
XD-55 Winch for Drone | Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-55 Winch for Drone Introducing the XD-55 Winch for Drone—an advanced lifting system eng... |
 |
XD-10 Winch for Drone | Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-10 Winch for Drone SAFE, EFFICIENT AND CONVENIENT.Your reliable and intelligent air transport... |
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | Seller: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | Seller: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
