BM2 Hydraulic Spool Valve Motor
Brief Introductionof hydraulic motor spool valve:
BM2 motor is a spool valve type motor.
Characteristic Features:
1, Spool valve motoradapt the gerolor design. Combination efficiency is better than BM1 motor.
2, Credible design for shaft seal, which can bear high pressure and be used in parallel or in series.
3, Direction of shaft rotation and speed can be controlled easily and smoothly.
4, Best combination of efficiency and economy in medium duly application.
Product Description
|
Quick Details |
||||
|
Type: |
Hydraulic Motor |
Series |
BM2 hydraulic motor |
|
|
Place of Origin |
China (Mainland) |
Brand Name |
Gulex |
|
|
Displacement(ml/r) |
50-500 |
Material |
Ductile Iron |
|
|
max torque(N*m) |
100~580N*m |
Surface treatment |
Spray Painting |
|
|
pressure(MPa) |
8~17.5 MPa |
Max cont Flow |
75L/min |
|
|
Speed(RPM) |
110~755r/min |
Oil tempreture |
-35℃~80℃ |
Operational Precautions(1) Check all components of the hydraulic system correctly before operation, and add oil to the specified height through the filter.(2) Start the operation for 10 to 15 minutes without load, and perform exhausting, foam in the fuel tank, noise in the system, and stagnant motor cylinders to prove that there is air in the system.(3) After removing the air, fill up the fuel tank, and then gradually increase the load to the motor until the maximum load, observe whether there are abnormal phenomena, such as noise, oil rise and oil leakage.(4) Replace the oil by running for 50 hours, and replace it according to the maintenance rules.(5) If it is not a motor failure, please do not disassemble it easily.
Are you looking for forge parts? JC forging is a professional manufacturer of precision forging parts. Just contact us!
Send product request
Other supplier products
 |
Small Excavator Series Cylinders | What is mini excavator hydraulic cylinder? These cylinders are mainly for small excavators, including stick cylinders, boom cylinders, bucket cylin... |
 |
HSG Engineering Hydraulic Cylinders | Founded in 2000, JC, large hydraulic cylinder manufacturers,forging is a forged components manufacturerof forged metal products. The company's main... |
 |
Small Excavator Series Cylinders | Brief introduction: These cylinders are mainly for small excavators, including stick cylinders, boom cylinders, bucket cylinders and dozer cylinde... |
 |
BM6 High Pressure Motor | Brief Introduction: BM6 high pressure hydraulic motoris a face-end flow, pressure-compensated motor, mainly composed of output shaft, front cove... |
 |
Products | Industry leaders in a variety of demanding markets continue to choose Walker Forge as a full-service partner for forged components delivered ready ... |
Same products
 |
Shoes Flexing Tester | Seller: Qinsun Instruments Co., Ltd | It's used for determining the flexibility resistance and or indicating the cracks od shoe or shoe... |
 |
Shoelace Abrasion Tester | Seller: Qinsun Instruments Co., Ltd | Application: This shoelace abrasion tester is used for shoelace against standard eyelet abrasion... |
 |
Heel Fatigue Tester | Seller: Qinsun Instruments Co., Ltd | Heel Fatigue Tester is used to determine the resistance of medium and high heels of ladies’... |
 |
Heel Impact Tester | Seller: Qinsun Instruments Co., Ltd | Heel Impact Tester is used to determine the impact strength of heels of ladies’shoes. Ap... |
 |
Ross Flex Tester | Seller: Qinsun Instruments Co., Ltd | Whole Sole ROSS Flexing Tester GT-KB05D To determine right angle flexing risistance for whole sol... |
