BM2 Hydraulic Spool Valve Motor
Brief Introductionof hydraulic motor spool valve:
BM2 motor is a spool valve type motor.
Characteristic Features:
1, Spool valve motoradapt the gerolor design. Combination efficiency is better than BM1 motor.
2, Credible design for shaft seal, which can bear high pressure and be used in parallel or in series.
3, Direction of shaft rotation and speed can be controlled easily and smoothly.
4, Best combination of efficiency and economy in medium duly application.
Product Description
|
Quick Details |
||||
|
Type: |
Hydraulic Motor |
Series |
BM2 hydraulic motor |
|
|
Place of Origin |
China (Mainland) |
Brand Name |
Gulex |
|
|
Displacement(ml/r) |
50-500 |
Material |
Ductile Iron |
|
|
max torque(N*m) |
100~580N*m |
Surface treatment |
Spray Painting |
|
|
pressure(MPa) |
8~17.5 MPa |
Max cont Flow |
75L/min |
|
|
Speed(RPM) |
110~755r/min |
Oil tempreture |
-35℃~80℃ |
Operational Precautions(1) Check all components of the hydraulic system correctly before operation, and add oil to the specified height through the filter.(2) Start the operation for 10 to 15 minutes without load, and perform exhausting, foam in the fuel tank, noise in the system, and stagnant motor cylinders to prove that there is air in the system.(3) After removing the air, fill up the fuel tank, and then gradually increase the load to the motor until the maximum load, observe whether there are abnormal phenomena, such as noise, oil rise and oil leakage.(4) Replace the oil by running for 50 hours, and replace it according to the maintenance rules.(5) If it is not a motor failure, please do not disassemble it easily.
Are you looking for forge parts? JC forging is a professional manufacturer of precision forging parts. Just contact us!
在线联系供应商
Other supplier products
 |
Hydraulic Steering Control Units | The hydraulic steering gear is a hydraulic power steering type between the steering wheel and the steering mechanism, which does not need to be con... |
 |
BM2 Hydraulic Spool Valve Motor | What is BM2 Hydraulic Spool Valve Motor? BM2 motor is a spool valve type motor. Characteristic Features of BM2 Hydraulic Spool Valve Motor: 1,... |
 |
Medium Excavator Series Cylinders | Brief Introduction: This type of cylinder is mainly used for medium excavators, including stick cylinders, boom cylinders, and bucket cylinders. U... |
 |
1.Products | Industry leaders in a variety of demanding markets continue to choose Walker Forge as a full-service partner for forged components delivered ready ... |
 |
Forged Trunnion | Founded in 2000, JC forging is a forged components manufacturerof forged metal products. The company's main product is die mold forging parts, incl... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
