10-20HL / 10-20BBL Craft Brewery System
General descriptionof :
of 20hl from ZYBREW is most customized as the basic request on from client and the existing building. Or we do turnkey solution design from Greenland. The brewhouse efficiency range from 2-8 brews based on different preferred configuration.
The design and fabrication are both following what is more suitable for local request, to make sure client has less extra cost on other issues when running the brewery. We make operating the system for brewing easier and more efficient as the priority, meanwhile we try our best to lower the cost of material and save energy, to help all clients all over the world find the best balance between investment and income.
Featuresabout :
Higher wort wort extract
Lower energy cost and material consumption
Well adjusted temp and water blending unit for better grain and water mixing
Special designed steam jacket unit to increase steam using efficiency and avoid “water hammer” problem
Special tank and piping construction to avoid the wort aeration problem and decrease the material lost
Internal heater for separate kettle, working with cylinder and bottom jacket for better boiling effect.
Possible to make boiling process under pressure, especially for brewery at higher altitude.
Special designed steam condensing unit, with both steam condensing and water heating function
Cellar tanks with good design updating for better cooling effect and accurate temp control
Pre assembled cellar piping, with cat walks for operation on top or manifold or piping corridor
Cooling unit for current use and well prepared for future expanding
Automation system with curve indication and production record printing, with recipe storage function, clients can create new recipe as the exact production requirement.
Basic configurationof :
Grain handling: Mill, conveyor (flexi auger or chain disc), hopper etc. With weight scaling
Brewhouse: Three or four vessels, including piping, HE etc.
Cellar: Fermenter, storage tank and BBTs, for fermentation of different kinds of beer, all assembled and isolated
Cooling: Chiller connected with glycol tank for cooling, with ice water tank and plat cooler for wort cooling
CIP: Fixed CIP station or Portable CIP unit
Filtration: Diatomite filtration, membrane filter, Plate frame filtration unit etc.
Compressed air unit and N2 generator, all piping line connected with system
Send product request
Other supplier products
 |
Horizontal Beer Storage Tank | Feature Description: The mainly for beer storage, which can be stacked with 2-3 tanks, to make full use of the height. Fermentation finished in sh... |
 |
50L Fermenter-Home Brewing | 50L Fermenter-Home Brewing Material: SUS 304 S/S Volume: 50L effective Tank working pressure: 2bar Single layer or jacketed Possible insulatio... |
 |
500L Brew House | 500L Brew House Capacity: 500L Model: ZY-BH-500L Material: AISI 304SS/316SS/Copper Heating method: Gas fired Basic configuration: Mash/kettle+... |
 |
Small / Medium Craft Brewery | General description: ZYBREW is more used for brewpubs or customers who wants to make smaller breweries. The size range from 3HL to 10hl, or 3BBL t... |
 |
30BBL 3-4 Vessel Brew House | 30BBL 3-4 Vessel Brew House Capacity: 30BBL Model: ZY-BH-30BBL Material: AISI 304 SS/316 SS/Copper Heating method: Steam heating(Preferred) Ba... |
Same products
 |
XD-MAX Winch for Drone | Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-MAX Winch for Drone The XD-MAX Winch for Droneis a high-performance aerial lifting solution d... |
 |
XD-55 Winch for Drone | Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-55 Winch for Drone Introducing the XD-55 Winch for Drone—an advanced lifting system eng... |
 |
XD-10 Winch for Drone | Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-10 Winch for Drone SAFE, EFFICIENT AND CONVENIENT.Your reliable and intelligent air transport... |
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | Seller: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | Seller: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
