10-20HL / 10-20BBL Craft Brewery System
General descriptionof :
of 20hl from ZYBREW is most customized as the basic request on from client and the existing building. Or we do turnkey solution design from Greenland. The brewhouse efficiency range from 2-8 brews based on different preferred configuration.
The design and fabrication are both following what is more suitable for local request, to make sure client has less extra cost on other issues when running the brewery. We make operating the system for brewing easier and more efficient as the priority, meanwhile we try our best to lower the cost of material and save energy, to help all clients all over the world find the best balance between investment and income.
Featuresabout :
Higher wort wort extract
Lower energy cost and material consumption
Well adjusted temp and water blending unit for better grain and water mixing
Special designed steam jacket unit to increase steam using efficiency and avoid “water hammer” problem
Special tank and piping construction to avoid the wort aeration problem and decrease the material lost
Internal heater for separate kettle, working with cylinder and bottom jacket for better boiling effect.
Possible to make boiling process under pressure, especially for brewery at higher altitude.
Special designed steam condensing unit, with both steam condensing and water heating function
Cellar tanks with good design updating for better cooling effect and accurate temp control
Pre assembled cellar piping, with cat walks for operation on top or manifold or piping corridor
Cooling unit for current use and well prepared for future expanding
Automation system with curve indication and production record printing, with recipe storage function, clients can create new recipe as the exact production requirement.
Basic configurationof :
Grain handling: Mill, conveyor (flexi auger or chain disc), hopper etc. With weight scaling
Brewhouse: Three or four vessels, including piping, HE etc.
Cellar: Fermenter, storage tank and BBTs, for fermentation of different kinds of beer, all assembled and isolated
Cooling: Chiller connected with glycol tank for cooling, with ice water tank and plat cooler for wort cooling
CIP: Fixed CIP station or Portable CIP unit
Filtration: Diatomite filtration, membrane filter, Plate frame filtration unit etc.
Compressed air unit and N2 generator, all piping line connected with system
在线联系供应商
Other supplier products
 |
30-50HL / 30-50BBL Craft Brewery Equipment | General descriptionabout : of 30hl-50hl from ZYBREW is for the whole project management based on exact building or new projects from greenland, wi... |
 |
300L Brew House Micro Brewery Equipment | 300L Brew House Micro Brewery Equipment Capacity: 300L Model: ZY-BH-300L Material: AISI 304 SS/316 SS/Copper Heating method: Electric, gas fired, s... |
 |
1500L Three Vessel Brew House | 1500L Three Vessel Brew House Capacity: 1500L Model: ZY-BH-1500L Material: AISI 304 SS/316 SS/Copper Heating method: Steam heating(Preferred) ... |
 |
7-10BBL Brew House | 7-10BBL Brew House Capacity: 7-10BBL Model: ZY-BH-7BBL/ ZY-BH-10BBL Material: AISI 304SS Heating method: Gas fired Basic configuration: Mash/l... |
 |
7BBL Fermenter / Unitank | 7BBL Fermenter/ Unitank Material: SUS 304 S/S Volume: 7BBL effective, 9.3BBL total volume, 25% head space, without domed head space Our company ... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
