HM-100 High-temperature Hygronom
Overview
Hygronom is also called gas moisture meteror dew-point meter, which is used to measure the humidity of flue gas emitted by pollution source. According to measured humidity, it converts wet gas concentration into dry gas concentration. In addition, it also can be used in industrial online humidity monitoring.
HM-100 flue gas hygronom (high temperature gas analyzer) is equipped with an internal high-precision capacitance digital temperature & humidity sensor. The installation method adopts the in-situ immersion installation. It is a self-developed product, of which, the core component is from Switzerland. Put the sensor inside stack to get in touch with flue gas. The probe needs preheating to prevent gas from condensation, which will affect the measurement of moisture in the flue gas. After gas contacts with the measurement chip, the chip will change capacitance to measure flue gas concentration.
Features Of HM-100 High-temperature Hygronom
• The product is convenient for installation, disassembly, and cleaning with small and compact structure
• Direct and simple key operation on site
• The probe is equipped with heat tracing function to prevent condensate water from damaging humicap and thermal resistance
• Imported core components with high-performance index and reliability
Technical Parameter Of HM-100 High-temperature Hygronom
|
Measurement Range |
H2O: 0~40.00%(volume percent)(optional) |
|
Humidity sensor |
Resistance-capacitance |
|
Temp sensor |
Pt100 platinum resistor |
|
Accuracy |
0～40.00% H2O:±2% |
|
Repeatability |
0～40.00% H2O:±1% |
|
Stability |
0～40.00% H2O:±1%F.S./7d |
|
Response time |
T90＜6s |
|
Sensor life |
＞2 years (under normal use) |
|
Transmitter life |
＞5 years (under normal use) |
|
Power supply |
220VAC |
|
Instrument weight |
About 10kg |
|
Power consumption |
Maximum about 35VA (heating) |
|
Ambient temperature |
Transmitter: -10°C～+55°C |
|
Probe: 0～180°C (except probe cable) |
|
|
Ambient humidity |
＜95%RH |
|
Sample gas flow |
(2～6)L/min |
|
Analog output (2 sets) |
Temperature and humidity, 4-20mA |
|
Communication |
Rs232 (standard) |
Typical Application Of HM-100 High-temperature Hygronom
HANGZHOU ZETIAN TECHNOLOGY CO., LTDhas gas moisture analyzer,welcome to order it.
Send product request
Other supplier products
 |
WDet-5000UVI Immersion UV Water Analyzer | Overview Of WDet-5000UVI Immersion UV Water Analyzer WDet-5000UVI is the first full-spectrum (200-800nm) immersion UV portable water quality analy... |
 |
WDet-5000 Ammonia-Nitrogen Online Automatic Analyzer | HANGZHOU ZETIAN TECHNOLOGY CO., LTDwas established in 2008, and as a fast-growing company specialized in environmental pollution monitoring and i... |
 |
EM-5P Portable Flue Gas Analyzer | Overview EM-5P portable gas monitoring system mainly consists of gas monitoring sensors (SO2, NOx, CO, CO2), sample conditioning unit, sampling un... |
 |
EM-5 Flue Gas Analyzer | Overview EM-5 series flue gas analyzer is a series of self-developed gas analysis products for online gas analysisof domestic as well as foreign en... |
 |
DPM-6000 PM Monitor PM2.5/PM10 | Overview Inhalable particle content is one of the most important indexes for measuring air quality. Combining years of experience in developing env... |
Same products
 |
protective clothing Antisynthetic blood penetration tester | Seller: Qinsun Instruments Co., Ltd | It is applicable to the resistance of the protective clothing to the synthetic blood penetration ... |
 |
Respirator Fit Tester | Seller: Qinsun Instruments Co., Ltd | The Protective Mask Leak Tester is a portable device designed to detect the service performance a... |
 |
Floor coverings flammability tester | Seller: Qinsun Instruments Co., Ltd | Applications:TheFlammability Test Chamberis used to test the effects of a small source of ignitio... |
 |
Cantilever Fabric Stiffness Tester | Seller: Qinsun Instruments Co., Ltd | Application: Fabric Stiffness Tester, is a practical equipment to determine the bending height, ... |
 |
Automatic Wrinkle Recovery Tester | Seller: Qinsun Instruments Co., Ltd | The main principle of the wrinkle recovery tester is to apply a predetermined pressure to the spe... |
