.

Machine Vision Lens & Illuminator Manufacturer

Since 2009, Canrill has provided more than 1700 kinds of high-performance telecentric lensand illuminator for machine vision system. With the characteristics of extensive models, immediate delivery, cost-effective solutions and free customization service, Canrill can always be your first choice to select the most suitable machine vision lensand illuminators.

Canrill Machine VisionLens & Illuminator List

Wide range of high performance telecentric lens supporting sensor size from 4.8mm to 82mm, characterized by high resolution, little-to-no-distortion, and good imaging consistency.

16k Line Scan (82mm) Telecentric Lens

12k Line Scan (62mm) Telecentric Lens

8k Line Scan (57.4mm) Telecentric Lens

Full Frame Telecentric Lens

38mm Sensor Telecentric Lens

35mm Sensor Telecentric Lens

2' (32mm) Sensor Telecentric Lens

7-4' (28mm) Sensor Telecentric Lens

4-3' (23mm) Sensor Telecentric Lens

1' (16.2mm) Sensor Telecentric Lens

Low Mag 2-3' Sensor Telecentric Lens

High Mag 2-3' Sensor Telecentric Lens WD 65mm

High Mag 2-3' Sensor Telecentric Lens WD 110mm

Low Mag 1/2' Sensor Telecentric Lens

High Mag 1-2' Sensor Telecentric Lens WD 65mm

High Mag 1-2' Sensor Telecentric Lens WD 110mm

High Mag 1-2' Sensor Telecentric Lens Long Working Distance

Telecentric Illuminator

9 types of telecentric illuminator covering the beam diameter from 20mm to 238mm, offering higher edge contrast, and is recommended for high accuracy measurement.

View More

Non-Telecentric Lens

Non-telecentric lens MH series is the latest series Canrill has developed in 2020, suitable for measurement and high-end positioning applications which do not require telecentricity. A supplement and replacement of FA lens and low resolution telecentric lens.

View More

Microscopy Lens

Canrill miscroscopy lens VM series adopt modular design, different combinations can realize different functions. Major module consists of main body, illumination, horizontal imaging module, mount and other special parts.

View More

DMD Lithography Lens

Canrill dual-waveband and tri-waveband LDI lens optimize the image quality completely and the transmittance, which is better than 80% during waveband from 360nm to 400nm while ensuring the image quality in the same time

View More

Telecentric Lens Accessory

Canrill offers different types of prism, controller and point illumination to support the use of our high performance lens. Whether you need to bend light for applications with space constraints, or point illumination matched with coaxial lens, Canrill has options to help you optimize your solution as much as possible.

View More

Why Canrill Machine Vision Optics Products Are Worth Your Trust

11 Years' R&D Experience

20+ Senior Researchers

1um Accuracy

1700+ Models

Lifetime Warranty

11 Years' R&D Experience

11 Years' R&D experience on telecentric solutions for various applications since 2009, professional and experienced to offer existing or customized vision products for different industries.

20+ Senior Researchers

More than 20 senior researchers in both optical and mechanical field ensures the upgrading of new series and unmatched technical service.

1um Accuracy

High resolution with the measurement accuracy as high as 1um

1700+ Models

More than 1700 models of telecentric lens and other machine vision products in existing product line, and this number keeps increasing per day.

Lifetime Warranty

Canrill Optics guarantees lifetime warranty for all machine vision products, replace new one for non-human factors within 2 years, and lifetime maintenance

Custom Machine Vision Lens & Illuminator From Canrill

Canrill catalog or product list on website only presents our most common models. Canrill also has an extensive of non-standard models in production. In addition, Canrill Optics offer customized machine vision lens or illuminators upon detailed request from customers. With rich experience both in optical design and mechanical engineering, and also our own optical factory and mechanical factory, Canrill is able to react fastest from design to prototype to mass production.

Canrill's record is 12 days to produce a complete new lens including design time.

Custom Machine Vision Lens & Illuminator From Canrill

Machine Vision Lens Fundamentals to Consider

There Are Three Basic Principles Of Lens Selection:

Lens Object FOV is a little larger than customer required FOV.

Lens Image FOV is equal or larger than camera sensor size.

Mag below 1X refers to low mag, above 1X refers to high mag.

There Are 3 Important Factors That Contribute In The Selection Process:

Image FOV, the sensor size of camera

Object FOV, the size of observed object

Working Distance

By image FOV and object FOV, the magnification of the lens can be acquired, that is image FOV/Object FOV.

Knowing the above, we can select a suitable lens from the existing product list.

Example:

Camera:1/2.5’-5MP

Sensor size: 5.7*4.3mm

FOV: 60*40mm

To pick a suitable lens, first to calculate the mag, 5.7/60=0.095X, 4.3/40=0.1075X.

Lower mag will be picked so as to cover full FOV.

From Canrill product line, Canrill fouth generation PTL series PTL-08 series is the most suiable, and the mag of XF-PTL09228 is 0.0847, is the closest figure to 0.095X.

Thus XF-PTL09228 is selected.

Canrill Optics is one of professional machine vision systems manufacturers. We provide Telecentric Lens, Telecentric Illuminator, Non-Telecentric Lens, magnification lensand so on. Want to know more? Please contact us.



Send product request

To: Shenzhen Canrill Technologies Co., Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

1.1' (18mm) Sensor Telecentric Lens
1.1' (18mm) Sensor Telecentric Lens Optimized bi-telecentric lens for 1.1' 3.45um cameras High mag and low mag of this series of machine vision telecentric lens are both available ...
Point Illumination
Point Illumination Suitable for low mag lens coaxial lighting, uniform light spot, high brightness Point IlluminationSpecification Model Light Colo...
Non-Telecentric Lens
Non-Telecentric Lens To provide extensive optical solutions in machine vision optics systems, Canrill Optics, as a custom lens manufacturer, has been keeping developing...
Telecentric Illuminator
Telecentric Illuminator Better clarity and WBC, higher telecentricity Especially suitable for round workpiece measurement、 Specification Of Telecentric Illuminator M...
Low Mag 2/3' Sensor Telecentric Lens
Low Mag 2/3' Sensor Telecentric Lens Megapixels high-resolution c mount telecentric lens Wide magnification ranges from 0.0282X to 0.5X Bi-telecentric design and object telecentr...
All supplier products

Same products

Excavator Cylinder Pins Induction Hardening
Excavator Cylinder Pins Induction Hardening Seller: TianYuan Induction Electric(Chengdu)Co., Ltd Excavator Cylinder Pins Induction Hardening Product Description This Complete Induction Hardeni...
3 Axis Glue Dispensing System Robot clutch dispensing Machine for Glue Epoxy Adhesive potting
3 Axis Glue Dispensing System Robot clutch dispensing Machine for Glue Epoxy Adhesive potting Seller: 824681 AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic ep...
Automatic Glue Mixing and Potting Machine for LED driver
Automatic Glue Mixing and Potting Machine for LED driver Seller: 824681 AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic ep...
AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic epoxy resin potting machine 2 Part Silicone plyurethane epoxy dosing and dispenser potting machine
AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic epoxy resin potting machine 2 Part Silicone plyurethane epoxy dosing and dispenser potting machine Seller: 824681 AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic ep...
Double Liquid AB Adhesive Dispenser Equipment
Double Liquid AB Adhesive Dispenser Equipment Seller: 824681 Double Liquid ABAdhesiveDispenserEquipment AB glue meter mix dispensing machine/automatic glue ...