Machine Vision Lens & Illuminator Manufacturer
Since 2009, Canrill has provided more than 1700 kinds of high-performance telecentric lensand illuminator for machine vision system. With the characteristics of extensive models, immediate delivery, cost-effective solutions and free customization service, Canrill can always be your first choice to select the most suitable machine vision lensand illuminators.
Canrill Machine VisionLens & Illuminator List
Wide range of high performance telecentric lens supporting sensor size from 4.8mm to 82mm, characterized by high resolution, little-to-no-distortion, and good imaging consistency.
16k Line Scan (82mm) Telecentric Lens
12k Line Scan (62mm) Telecentric Lens
8k Line Scan (57.4mm) Telecentric Lens
Full Frame Telecentric Lens
38mm Sensor Telecentric Lens
35mm Sensor Telecentric Lens
2' (32mm) Sensor Telecentric Lens
7-4' (28mm) Sensor Telecentric Lens
4-3' (23mm) Sensor Telecentric Lens
1' (16.2mm) Sensor Telecentric Lens
Low Mag 2-3' Sensor Telecentric Lens
High Mag 2-3' Sensor Telecentric Lens WD 65mm
High Mag 2-3' Sensor Telecentric Lens WD 110mm
Low Mag 1/2' Sensor Telecentric Lens
High Mag 1-2' Sensor Telecentric Lens WD 65mm
High Mag 1-2' Sensor Telecentric Lens WD 110mm
High Mag 1-2' Sensor Telecentric Lens Long Working Distance
Telecentric Illuminator
9 types of telecentric illuminator covering the beam diameter from 20mm to 238mm, offering higher edge contrast, and is recommended for high accuracy measurement.
View More
Non-Telecentric Lens
Non-telecentric lens MH series is the latest series Canrill has developed in 2020, suitable for measurement and high-end positioning applications which do not require telecentricity. A supplement and replacement of FA lens and low resolution telecentric lens.
View More
Microscopy Lens
Canrill miscroscopy lens VM series adopt modular design, different combinations can realize different functions. Major module consists of main body, illumination, horizontal imaging module, mount and other special parts.
View More
DMD Lithography Lens
Canrill dual-waveband and tri-waveband LDI lens optimize the image quality completely and the transmittance, which is better than 80% during waveband from 360nm to 400nm while ensuring the image quality in the same time
View More
Telecentric Lens Accessory
Canrill offers different types of prism, controller and point illumination to support the use of our high performance lens. Whether you need to bend light for applications with space constraints, or point illumination matched with coaxial lens, Canrill has options to help you optimize your solution as much as possible.
View More
Why Canrill Machine Vision Optics Products Are Worth Your Trust
11 Years' R&D Experience
20+ Senior Researchers
1um Accuracy
1700+ Models
Lifetime Warranty
11 Years' R&D Experience
11 Years' R&D experience on telecentric solutions for various applications since 2009, professional and experienced to offer existing or customized vision products for different industries.
20+ Senior Researchers
More than 20 senior researchers in both optical and mechanical field ensures the upgrading of new series and unmatched technical service.
1um Accuracy
High resolution with the measurement accuracy as high as 1um
1700+ Models
More than 1700 models of telecentric lens and other machine vision products in existing product line, and this number keeps increasing per day.
Lifetime Warranty
Canrill Optics guarantees lifetime warranty for all machine vision products, replace new one for non-human factors within 2 years, and lifetime maintenance
Custom Machine Vision Lens & Illuminator From Canrill
Canrill catalog or product list on website only presents our most common models. Canrill also has an extensive of non-standard models in production. In addition, Canrill Optics offer customized machine vision lens or illuminators upon detailed request from customers. With rich experience both in optical design and mechanical engineering, and also our own optical factory and mechanical factory, Canrill is able to react fastest from design to prototype to mass production.
Canrill's record is 12 days to produce a complete new lens including design time.
Custom Machine Vision Lens & Illuminator From Canrill
Machine Vision Lens Fundamentals to Consider
There Are Three Basic Principles Of Lens Selection:
Lens Object FOV is a little larger than customer required FOV.
Lens Image FOV is equal or larger than camera sensor size.
Mag below 1X refers to low mag, above 1X refers to high mag.
There Are 3 Important Factors That Contribute In The Selection Process:
Image FOV, the sensor size of camera
Object FOV, the size of observed object
Working Distance
By image FOV and object FOV, the magnification of the lens can be acquired, that is image FOV/Object FOV.
Knowing the above, we can select a suitable lens from the existing product list.
Example:
Camera:1/2.5’-5MP
Sensor size: 5.7*4.3mm
FOV: 60*40mm
To pick a suitable lens, first to calculate the mag, 5.7/60=0.095X, 4.3/40=0.1075X.
Lower mag will be picked so as to cover full FOV.
From Canrill product line, Canrill fouth generation PTL series PTL-08 series is the most suiable, and the mag of XF-PTL09228 is 0.0847, is the closest figure to 0.095X.
Thus XF-PTL09228 is selected.
Canrill Optics is one of professional machine vision systems manufacturers. We provide Telecentric Lens, Telecentric Illuminator, Non-Telecentric Lens, magnification lensand so on. Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
DMD Lithography Lens | We have been in close cooperation with LDI (Laser Direct Imaging) manufacturers, to research and produce LDI lens. Our dual-waveband and tri-wav... |
 |
Microscope Objective Lens | Microscope Objective Lens Suitable for ITO, particle detection, wafer inspection Infinity optical design for different microscope lensescan mat... |
 |
Telecentric Lens Design Principle and Technical Advantages | Telecentric Lens is an optical design that the principal ray is in parallel to the optical axis. Because of these characteristics, the main advanta... |
 |
Low Mag 2/3' Sensor Telecentric Lens | Megapixels high-resolution c mount telecentric lens Wide magnification ranges from 0.0282X to 0.5X Bi-telecentric design and object telecentr... |
 |
Telecentric Lens | Telecentric lens, is a kind of lens that the chief rays are parallel to the optical axis. There are three kinds of telecentric lens, that is object... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
