6 1/2" tci tricone bit for water well drilling
|
BasicalParameter |
|
|
Bit Size |
6 1/2"(165MM) |
|
IADC Code |
537 |
|
Connection |
3 1/2"API reg pin |
|
Rotary Speed(rpm) |
110~40 |
|
Weight on Bit(KN/MM) |
|
|
Formation |
Low compressive strength, medium hard formation with hard abrasive interlayer,like Hard shale, anhydrite, soft limestone, sandstone, dolomite with mezzanine, etc. |
1)Cutting StructureThe wear-resisitance of the teethy is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for the steel tooth bit. The durability of premium tngsten carbide inserts is improved with new formulas and new techniques for insert bit.
2)Gauge Structure
Multipe gauge protection with gauge trimmers on the heel of cone, tungsten carbides insert and hardfacing on the shirt tail increases gauge holding capability and bearing life.
3)Bearing structure
High precisiong journal bearing with two thrust faces.Balls lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver plated. abrasion resistance and seizure resistance of the bearing are improved.
4)Seal and LubricationPremium HNBR O-ting, optimal seal compression and curved seal strcture can enhance seal performance. The pressure compensat or system and adwanced grease can greatly increase the lubricating reliability.
5)Product Application It can receive high WOB in the conwentional drilling. Ti is suitable for various formations by matcing cutting structure with defferent tooth shape, tooth density and tooth exposure height.
Send product request
Other supplier products
 |
API 10 5/8 IADC537 tci tricone rock drill bits | BasicalParameter Bit Size 10 5/8"(269.9MM) IADC Code 537 Connection 6 5/8"API reg pin Ro... |
 |
10 5/8" steel tooth tricone drill bit for water well drilling | BasicalParameter Bit Size 10 5/8"(270MM) IADC Code 127 Tooth Type Steel /Milled Tooth ... |
 |
water well drilling three-cone 8 3/8" iadc127 tricone bit | BasicalParameter Bit Size 8 3/8"(212.7MM) IADC Code 127 Tooth Type Steel /Milled Tooth ... |
 |
20" iadc127 steel tooth tricone bit for different formation | BasicalParameter Bit Size 20"( 508MM) IADC Code 127 Tooth Type Steel /Milled Tooth B... |
 |
8 3/4'' Steel tooth drill bit with sealed bearing roller bit | BasicalParameter Bit Size 8 3/4"(222.2MM) IADC Code 127 Tooth Type Steel /Milled Tooth ... |
Same products
 |
protective clothing Antisynthetic blood penetration tester | Seller: Qinsun Instruments Co., Ltd | It is applicable to the resistance of the protective clothing to the synthetic blood penetration ... |
 |
Respirator Fit Tester | Seller: Qinsun Instruments Co., Ltd | The Protective Mask Leak Tester is a portable device designed to detect the service performance a... |
 |
Floor coverings flammability tester | Seller: Qinsun Instruments Co., Ltd | Applications:TheFlammability Test Chamberis used to test the effects of a small source of ignitio... |
 |
Cantilever Fabric Stiffness Tester | Seller: Qinsun Instruments Co., Ltd | Application: Fabric Stiffness Tester, is a practical equipment to determine the bending height, ... |
 |
Automatic Wrinkle Recovery Tester | Seller: Qinsun Instruments Co., Ltd | The main principle of the wrinkle recovery tester is to apply a predetermined pressure to the spe... |
