215.9MM Rotary TCI Tricone Bit 8 1/2 Inch With Multiple Gague Protection
Cutting Structure
The wear-resistance of the teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for the steel tooth bit.The durability of premium tungsten carbide inserts is improved with new formulas and new techniques for insert bit
Gauge Structure
Multiple gague protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone,tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capacity and bearing life.
Bearing Structure
High precision journal bearing with two thrust faces,Balls lock the cone.Hardfaced head bearing surface.Cone bearing inlaid with friction-reducing alloy and then silver-plated.Abrasion resistance and seizure of the bearing are improved.and suitable for high rotary speed
Seal and Lubrication
The advanced metal seal package consists of two metal seals and two elastic energizers.Compressed energizers ensure good contact being kept on two sealing surfaces of metal rings by elastic force,and achieves the bearing seal.In the drilling,metal seals are relatively dynamic,and the energizers are static.This will improve the reliability and durability of bearing seal.The pressure compensator system and advanced grease can greatly increase the lubricating reliability.
| Basical Parameter | |
| Bit Size | 8 1/2"(200MM) |
| IADC Code | 537G |
| Connection | 4 1/2"API reg pin |
| Nozzle Qty | 3NZ |
| Make up Torque(KN.m) | 16.3~21.7 |
| Operating Parameter | |
| Rotary Speed(rpm) | 80~40 |
| Weight on Bit(KN/MM) | 0.5~1.2 |
| Formation | Hard formation with high compressive strength ,such as limestone,sandstone,dolomite,hard gypsum,marble,etc. |
Send product request
Other supplier products
 |
8 1/2 inch IADC127 Milled Tooth Tricone Bit | BasicalParameter Bit Size 8 1/2"(216MM) IADC Code 127 Tooth Type Steel /Milled Tooth ... |
 |
9 7/8" IADC537 TCI tricone drill bit | BasicalParameter Bit Size 9 7/8"(250.8MM) IADC Code 537 Connection 6 5/8"API reg pin ... |
 |
5 3/4inch mill tooth drilling bit for soft drilling formation | BasicalParameter Bit Size 5 3/4"(146MM) IADC Code 127 Tooth Type Steel /Milled Tooth Bea... |
 |
8 1/2 IADC537 single cone bits for HDD Reamer | Bit Size 8 1/2"(215.9MM) Model 537 Application Suitable for hole operners used for HDD engineering ... |
 |
9 5/8'' steel tooth tricones bits for water well drilling | BasicalParameter Bit Size 9 5/8"(224.5MM) IADC Code 127 Tooth Type Steel /Milled Tooth ... |
Same products
 |
YZH WHEN1510 Stationary Pedestal Rockbreaker Boom | Seller: Shandong Yirun Foundation Engineering Co., Ltd | Below is a detailed introduction to the YZH WHEN1500 fixed hydraulic demolition arm, covering its... |
 |
YZH WHEN1410 Stationary Pedestal Rockbreaker | Seller: Shandong Yirun Foundation Engineering Co., Ltd | YZH WHEN1410 Stationary Pedestal Rockbreaker is a specialized equipment designed for secondary cr... |
 |
YZH WHEN 1300 Stationary Pedestal Rockbreaker | Seller: Shandong Yirun Foundation Engineering Co., Ltd | The Features of the WHEN 1300 Stationary Pedestal Rockbreaker: Intelligent Multi-Mode Control: S... |
 |
WHE1500 Pedestal Breaker Boom Systems | Seller: Shandong Yirun Foundation Engineering Co., Ltd | The Features of WHE1500 Pedestal Breaker Boom Systems: The WHE1500 Pedestal Breaker Boom System ... |
 |
WHEN1850 boom breaker | Seller: Guangxi YZH Machinery Equipment Co.Ltd | A high-performance crushing equipment is crucial in the secondary crushing process of industries ... |
