Mechanical Dosing Pump

Mechanical Dosing Pump

The mechanical metering pumpis a motor that drives a worm gear pair to make a variable speed movement through a direct drive. Under the action of a crank connecting rod mechanism, the rotary motion is converted into a reciprocating linear motion. The so-called diaphragm metering pump uses a specially designed and processed flexible diaphragm to replace the traditional piston, and realizes reciprocating motion under the action of the driving mechanism, thereby completing the suction to discharge process. Due to the isolation effect of the diaphragm, the isolation between the metered fluid and the driving lubrication mechanism is truly realized in structure. Since its diaphragm bears the pressure on the medium side, the maximum discharge pressure of a mechanical diaphragm pump generally does not exceed 1.2MPa.

① When the diaphragm is pulled back, the outlet ball valve falls down and tightly fits the ball seat. The inlet ball valve floats upward due to the vacuum generated between the diaphragm and the pump head when the diaphragm is pulled back, and the liquid is sucked up.

②When the diaphragm is pushed forward, the inlet ball valve is airtight with the ball seat to prevent liquid from passing through, and the outlet is pushed forward by the diaphragm to open the ball valve and the liquid is discharged.

①the ball seat and ball valve cannot be airtight

②the entrance and exit are blocked by foreign matter

③diaphragm damage.

Therefore, when the liquid is conveyed abnormally, the problem should be solved in this direction, and the factors that cause the above situation are too numerous to list, depending on the piping, fittings and operating conditions at the time.

Features Of Mechanical Diaphragm Metering Pump

(1) Lower price;

(2) No dynamic seal and no leakage;

(3) It can transport high-viscosity media, abrasive slurries and hazardous chemicals;

(4) The diaphragm bears high stress and the diaphragm life is relatively low;

(5) The outlet pressure is below 3MPa, and the measurement accuracy is ±2%;

(6) No safety relief device.

How To Install A Mechanical Diaphragm Metering Pump?

The mechanical diaphragm metering pump is supported by a solid, anti-vibration foundation. The foundation is higher than the ground, one side of which is washed by water, and is also easy to repair. Enough space around the mechanical diaphragm metering pump is reserved to facilitate pump maintenance and adjustment.

There are mounting holes at the bottom of the mechanical diaphragm metering pump for mounting anchor bolts.

The mechanical diaphragm metering pump installed outdoors should be covered by a canopy.

Ark Electric & Mechanical Co., Ltd. is a professional dosing pump manufacturer, we provide single diaphragm dosing pump, metering dosing pump, etc. Want to know more? Please contact us.

Other supplier products

	DFD Type Solenoid Dosing Pump	DFD Type Solenoid Dosing Pump Eccentric shaft is supported by bearings in front and rear and the cantilever shaft structure of the most of manuf...
	Mechanical Dosing Pump	Mechanical Dosing Pump The mechanical diaphragm metering pumpis a motor that drives a worm gear pair to make a variable speed movement through a ...
	Ecodose Type Mechanical Motor Dosing Pump	EcodoseType Mechanical Motor Functional Motor Dosing Pump AssemblyCharacteristics Ark Electric & Mechanical Co., Ltd.(ARK LTD) is a ...
	Water Dosing Pump	The Features Of The Liquid Dosing Pump No leakage The liquid dosing pump uses a non-mechanical shaft seal, so there is no leakage. Output ...
	High Pressure Dosing Pump	High pressure dosing pumpare useful in many occasions of technology, and high pressure and mass flow are the typical features of it. However, high ...

All supplier products

Same products

	protective clothing Antisynthetic blood penetration tester	Seller: Qinsun Instruments Co., Ltd	It is applicable to the resistance of the protective clothing to the synthetic blood penetration ...
	Respirator Fit Tester	Seller: Qinsun Instruments Co., Ltd	The Protective Mask Leak Tester is a portable device designed to detect the service performance a...
	Floor coverings flammability tester	Seller: Qinsun Instruments Co., Ltd	Applications:TheFlammability Test Chamberis used to test the effects of a small source of ignitio...
	Cantilever Fabric Stiffness Tester	Seller: Qinsun Instruments Co., Ltd	Application: Fabric Stiffness Tester, is a practical equipment to determine the bending height, ...
	Automatic Wrinkle Recovery Tester	Seller: Qinsun Instruments Co., Ltd	The main principle of the wrinkle recovery tester is to apply a predetermined pressure to the spe...