Panel Roll Forming Machine
In the BOSJ Plant, you will get an exciting look behind the scenes of china cold roll forming machineparts manufacturing and installation. The tour of BOSJ Group parent plant takes you through all production areas from the press works to assembly. The main plant is located in the Yangtze River, near Shanghai. Approximately 150 employees work with BOSJ.
PANEL ROLL FORMING MACHINE
Overview of Panel Roll Forming Machine
The color plate produced by discharging, forming and post-forming cutting has a flat appearance, uniform paint, high strength and durability. Good metal roll forming machines for saleis the key to good plate production. The colored steel plate enters the forming part of the roller table, and after molding, it is pressed into the pressed part, and is pressed into a section of equal distance, and the cutter is responsible for the fixed length cutting.
Widely used in industrial and civil buildings, such as factories, warehouses, stadiums, exhibition halls, theaters and other rooms and walls.
Design and Characteristics of Panel Roll Forming Machine
The arc part of the track is the core part of the slide rail. The arc position after the first few press forming, when the vertical pass is rolled up, the formed arc should be formed, and the effective tube bundle protection is carried out by the upper and lower rolls or the horizontal wheel. Otherwise, the arc position of the material will change during the stretching process, R becomes smaller and becomes a triangle, the steel ball is not in the end, the two points contact the sound, and when the R becomes large, the matching rail is swayed, and the track is blurred when used. Uneven force, deformation of the slide rail, shortening the life.
The average force principle of each pass, the average roller of the whole line is subjected to the average force, the wear is balanced, and the service life of the roll is extended.
For floor deck roll forming machine, the problem of rolling stability is often encountered in production. In fact, the single roller group is asymmetric, the left side is stressed, and the material is skewed to the right; the right side is strong, and the material is deflected to the left.
The C12MoV material adopts its wear resistance, but the specific strength and hardness are contradictory. When heat treatment, the red hardness of C12MoV should be utilized. After quenching, two or even three times of tempering can reach the hardness.
Our company offers a wide range of panel forming machinesincluding r panel roll forming machine, metaldeckrollformingmachine, steel deck roll forming machine, etc. If you are interested in them, contact us for a competitive price.
Send product request
Other supplier products
 |
C PURLIN ROLL FORMING MACHINE | Purlins are rolled forms of flat steel sheets ranging between 1mm and 3mm steel. They are used for building the roofs and walls to support the deck... |
 |
C & Z PURLIN ROLL FORMING MACHINE | C and Z purlins are high-efficiency economical profiles. Due to the reasonable cross-sectional shape, they enable steel to perform at a higher leve... |
 |
STEEL ROLL FORMING MACHINE | Overview of Steel Roll Forming Machine Cold forming is a new technology and new technology for metal sheet forming, material saving, energy saving ... |
|
|
Rack Beam Roll Forming Machine | Storage rack beam is also known as cross beams, these Trays, steel rails are connected to the teardrop upright column to form a safe level of palle... |
 |
SHEET ROLL FORMING MACHINE | BOSJ steelsheetrollformingmachinehave a reasonable design structure, beautiful appearance, convenient operation, adjustment and maintenance. The fu... |
Same products
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | Seller: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | Seller: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
 |
3 in1 Decoiler Leveler Feeder | Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd. | 3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f... |
 |
NC Servo Feeder (0.1-3.0mm) | Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd. | NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of... |
 |
Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage | Seller: Uratech USA Inc | TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool... |
