Rockwool Continuous Sandwich Panel Production Line
The rockwool sandwich panel production lineis one continuous and automatic line that integrates mechanism, electrical controlling, hydraulic system and polyurethane chemical reaction technology. The rock wool sandwich panel machineadopts advanced international roll forming technology, digital servo technology, frequency conversion vector technology and hydraulic controlling technology, automatic stacking technology.
The advantages of this mineral wool sandwich panel machineare the following:
1) High automatization. The wholerockwool productionline adopts one full computer integration controlling system of digital servo technology, frequency conversion vector technology and hydraulic controlling technology, which realizes whole connection, collecting control and collecting management. Adopt the cutting style of cut to length without machine stop, so that realize full automatically.
2) High efficiency. The production speed of rockwool sandwich panel machine is 3～8m/min（adjustable according to product forming requirement). The annual product capacity of this line can reach to 800000 M2 (count on the base of 250work days per year and 10 work hours per day)
3) Easy operation. Adopt collecting controlling system, using man-machine conversation. After preparing for the raw material and finishing other production requirements, input required parameters, then the machine can make the product automatically.
4) Low production cost. Developing the machine's automatization, the whole line only needs 5-8 operators to operate the machine fully, which saves much labor cost and production management cost for enterprises.
Video of mineral wool sandwich panel production lineRock wool Continuous Sandwich Panel Production Line
Zhejiang JinggongScience and Technology Co., LTD., independently research, develop, and manufacture the PU/Rockwool sandwich panel continuous production line, which reaches the world's advanced technology, fills the blank of domestic PU/Rockwool production line manufacturing. It marks the coming of the era of localization of the PU/rock wool sandwich panel continuous production line. The PU/rock wool sandwich panel continuous production line manufactured by Zhejiang Jinggong Science and Technology Co., LTD. consists of the coiler system, filming, cutting, and slitting device, roll forming system, pre-heating device, rockwool system, rockwool upper and lower adhesive spraying system, pu side seal foaming machine, double belt system, double belt heating system, bandsaw system, stacker system, packing system, etc. It truly realized all the automatic integration production functions from pre-painted steel sheet decoiling to product's packaging. The maximum speed of this production line reaches 8 meters per minute, annual production of PU panel 1 million square meters.
The whole production line is exported to Jordan, Kuwait, Tonicia, Russia, Brazil, Argentina, UAE, India, and other countries. The performance of the production line got unanimous approval and favorable comments from the customers. With the development of the construction industry, PU side seal rock wool sandwich panel will be more widely used in construction field. Jinggong Science and Technology will provide the best products and top quality service to the general customers by using most sophisticated manufacturing and technology, also make our own contribution for national and even global environmental protection, energy conservation.
Main Parameters ofRockwool Continuous Sandwich Panel Production Line
Sandwich panel specification:
Length: Min cutting length is 2.5 m
Max cutting length is 12m
Width: (see profile drawing)
Thickness: (see profile drawing)
Raw material specification:
coil thickness: 0.4～0.6 mm (steel be flat without ups and downs, deformation and bending)
sheet yield stress: ≤235MPa
coil max width: 1250 mm (tolerance±2mm)
coil max weight: 5T
coil ID: Φ500 and Φ600 mm
coil OD: Φ1000 mm
Rock wool material: fiber length is >100mm, and the fiber should be arranged vertically, volume density is ≥70kg/m3, one-piece length is ≥3m.
EPS material: volume density is ≥18kg/m3, each edge nonstraightness is ≤1mm/m, radian is ≤3mm/m, the panel surface should be flat, roughness is ＜1.5mm/m, EPS panel one-piece length is ≥3m.
EPS material width: min width is 1/2mm of the sandwich panel width.
Machine rockwool specification:
Work line speed: 4000m/min (adjustable)
Machine length: about 70 m
Working height: 1050 mm（panel output height）
Laminating effective length: 7.5m
Control way: adopt industrial computer PLC
Total power: about 45 kw
Power: 380V/3phase/50 Hz
control voltage: 24 V/110 V/220 V
pneumatic: 0.7 Mpa (self-prepared by the factory)
best working temperature: around 25℃
Component List ofRock Wool Sandwich Panel Production Line
|
Component |
Qty |
Remarks |
|
|
1 |
5T passive decoiler (upper forming system) |
1set |
Loading capacity is ≤5t |
|
2 |
Upper roll forming machine |
1set |
With slitting and waste edge winder |
|
Lower roll forming machine |
1set |
||
|
Connecting roller of upper & lower forming system |
Each 1set |
||
|
Platform, stair and rail of upper roll forming machine |
1set |
||
|
3 |
Rock wool transfer device |
1set |
|
|
Rock wool edge cutting device |
1set |
||
|
Dust collector |
1set |
||
|
4 |
Rock wool clamp device |
Each 1 set |
|
|
5 |
Laminator host |
1set |
Effective length 7.5m |
|
6 |
Saw cutting system |
1set |
Upper & lower saw |
|
7 |
Support frame |
3sets |
|
|
8 |
Electric control system |
1set |
Panel Drawings Of Rockwool Continuous Sandwich Panel Production Line
Profiles of Rockwool Continuous Sandwich Panel Production Line
application: stone/concrete/rock wall panel, cold storage wall, aluminum foil surface decoration, rock wool panel with PU sealing, door panel, tile roof panel, rockwool box type wall, PU soft surface panel, PU roof panel.
Zhejiang Jinggong Science and Technology Co., Ltd.is a professional roll forming machine company, Jinggongprovides rollforming machines, sandwich panel machinery, etc.
Send product request
Other supplier products
 |
H-Beam Assembling Machine | The clamping and alignment of the web plate and flange plate will be done in H-beam assembly machine, there also have automatic tack-welding. Jingg... |
 |
Steel Structure Machine | Jinggongcan produce various kinds of steel frame machinesto match customer's requirements and develop the technology continuously. The main steel ... |
 |
Auxiliary Equipment | Here are the different types of auxiliary equipmentof our roll forming machine: curving punching forming machine, filming and cutting machine, slit... |
 |
Guardrail Roll Forming Machine | Guard rail roll forming machineis the special forming equipment for producing the speedway guide rail. One shift every month can produce 600 tons (... |
 |
H-Beam Welding Line | Hbeam weldingmachine consists of an assembling machine, front welding machine, turn-over device, back welding machine and the transmission conveyor... |
Same products
 |
Shoes Flexing Tester | Seller: Qinsun Instruments Co., Ltd | It's used for determining the flexibility resistance and or indicating the cracks od shoe or shoe... |
 |
Shoelace Abrasion Tester | Seller: Qinsun Instruments Co., Ltd | Application: This shoelace abrasion tester is used for shoelace against standard eyelet abrasion... |
 |
Heel Fatigue Tester | Seller: Qinsun Instruments Co., Ltd | Heel Fatigue Tester is used to determine the resistance of medium and high heels of ladies’... |
 |
Heel Impact Tester | Seller: Qinsun Instruments Co., Ltd | Heel Impact Tester is used to determine the impact strength of heels of ladies’shoes. Ap... |
 |
Ross Flex Tester | Seller: Qinsun Instruments Co., Ltd | Whole Sole ROSS Flexing Tester GT-KB05D To determine right angle flexing risistance for whole sol... |
