Rockwool Continuous Sandwich Panel Production Line
The rockwool sandwich panel production lineis one continuous and automatic line that integrates mechanism, electrical controlling, hydraulic system and polyurethane chemical reaction technology. The rock wool sandwich panel machineadopts advanced international roll forming technology, digital servo technology, frequency conversion vector technology and hydraulic controlling technology, automatic stacking technology.
The advantages of this mineral wool sandwich panel machineare the following:
1) High automatization. The wholerockwool productionline adopts one full computer integration controlling system of digital servo technology, frequency conversion vector technology and hydraulic controlling technology, which realizes whole connection, collecting control and collecting management. Adopt the cutting style of cut to length without machine stop, so that realize full automatically.
2) High efficiency. The production speed of rockwool sandwich panel machine is 3～8m/min（adjustable according to product forming requirement). The annual product capacity of this line can reach to 800000 M2 (count on the base of 250work days per year and 10 work hours per day)
3) Easy operation. Adopt collecting controlling system, using man-machine conversation. After preparing for the raw material and finishing other production requirements, input required parameters, then the machine can make the product automatically.
4) Low production cost. Developing the machine's automatization, the whole line only needs 5-8 operators to operate the machine fully, which saves much labor cost and production management cost for enterprises.
Video of mineral wool sandwich panel production lineRock wool Continuous Sandwich Panel Production Line
Zhejiang JinggongScience and Technology Co., LTD., independently research, develop, and manufacture the PU/Rockwool sandwich panel continuous production line, which reaches the world's advanced technology, fills the blank of domestic PU/Rockwool production line manufacturing. It marks the coming of the era of localization of the PU/rock wool sandwich panel continuous production line. The PU/rock wool sandwich panel continuous production line manufactured by Zhejiang Jinggong Science and Technology Co., LTD. consists of the coiler system, filming, cutting, and slitting device, roll forming system, pre-heating device, rockwool system, rockwool upper and lower adhesive spraying system, pu side seal foaming machine, double belt system, double belt heating system, bandsaw system, stacker system, packing system, etc. It truly realized all the automatic integration production functions from pre-painted steel sheet decoiling to product's packaging. The maximum speed of this production line reaches 8 meters per minute, annual production of PU panel 1 million square meters.
The whole production line is exported to Jordan, Kuwait, Tonicia, Russia, Brazil, Argentina, UAE, India, and other countries. The performance of the production line got unanimous approval and favorable comments from the customers. With the development of the construction industry, PU side seal rock wool sandwich panel will be more widely used in construction field. Jinggong Science and Technology will provide the best products and top quality service to the general customers by using most sophisticated manufacturing and technology, also make our own contribution for national and even global environmental protection, energy conservation.
Main Parameters ofRockwool Continuous Sandwich Panel Production Line
Sandwich panel specification:
Length: Min cutting length is 2.5 m
Max cutting length is 12m
Width: (see profile drawing)
Thickness: (see profile drawing)
Raw material specification:
coil thickness: 0.4～0.6 mm (steel be flat without ups and downs, deformation and bending)
sheet yield stress: ≤235MPa
coil max width: 1250 mm (tolerance±2mm)
coil max weight: 5T
coil ID: Φ500 and Φ600 mm
coil OD: Φ1000 mm
Rock wool material: fiber length is >100mm, and the fiber should be arranged vertically, volume density is ≥70kg/m3, one-piece length is ≥3m.
EPS material: volume density is ≥18kg/m3, each edge nonstraightness is ≤1mm/m, radian is ≤3mm/m, the panel surface should be flat, roughness is ＜1.5mm/m, EPS panel one-piece length is ≥3m.
EPS material width: min width is 1/2mm of the sandwich panel width.
Machine rockwool specification:
Work line speed: 4000m/min (adjustable)
Machine length: about 70 m
Working height: 1050 mm（panel output height）
Laminating effective length: 7.5m
Control way: adopt industrial computer PLC
Total power: about 45 kw
Power: 380V/3phase/50 Hz
control voltage: 24 V/110 V/220 V
pneumatic: 0.7 Mpa (self-prepared by the factory)
best working temperature: around 25℃
Component List ofRock Wool Sandwich Panel Production Line
|
Component |
Qty |
Remarks |
|
|
1 |
5T passive decoiler (upper forming system) |
1set |
Loading capacity is ≤5t |
|
2 |
Upper roll forming machine |
1set |
With slitting and waste edge winder |
|
Lower roll forming machine |
1set |
||
|
Connecting roller of upper & lower forming system |
Each 1set |
||
|
Platform, stair and rail of upper roll forming machine |
1set |
||
|
3 |
Rock wool transfer device |
1set |
|
|
Rock wool edge cutting device |
1set |
||
|
Dust collector |
1set |
||
|
4 |
Rock wool clamp device |
Each 1 set |
|
|
5 |
Laminator host |
1set |
Effective length 7.5m |
|
6 |
Saw cutting system |
1set |
Upper & lower saw |
|
7 |
Support frame |
3sets |
|
|
8 |
Electric control system |
1set |
Panel Drawings Of Rockwool Continuous Sandwich Panel Production Line
Profiles of Rockwool Continuous Sandwich Panel Production Line
application: stone/concrete/rock wall panel, cold storage wall, aluminum foil surface decoration, rock wool panel with PU sealing, door panel, tile roof panel, rockwool box type wall, PU soft surface panel, PU roof panel.
Zhejiang Jinggong Science and Technology Co., Ltd.is a professional roll forming machine company, Jinggongprovides rollforming machines, sandwich panel machinery, etc.
在线联系供应商
Other supplier products
 |
EPS Sandwich Panel Production Line | Main structure features ofEPS Sandwich Panel Machine 1) This EPS sandwich panel making machinehas the specification: nice appearance, low noise and... |
 |
What are the Specifications of Foam Sandwich Panels and Rock Wool Sandwich Panels in the Sandwich Panel Machine? | What are the Specifications of Foam Sandwich Panels and Rock Wool Sandwich Panels in the Sandwich Panel Machine? What are the rockwool sandwich... |
 |
Steel Structure Machine | Jinggongcan produce various kinds of steel frame machineto match customer's requirements and develop the technology continuously. The main steel s... |
 |
What Are the Differences Between PU and PIR Sandwich Panel? | PU sandwich panel and PIR sandwich panel are both sandwich panels and important products of the sandwich panel production line. So what are the cha... |
 |
PU/PIR Continuous Sandwich Panel Production Line | Continuous PU/PIR Sandwich Panel Production Line, also called polyurethane sandwich panel manufacturing line/production line/machine, is an automat... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
