A1880 Double Heads CNC RAM EDM Machine
All supplier products
A1880Double Heads CNC RAM EDM Machine
A1880 twin heads cnc edm die sinking machinehas two separated controllers and two separated machine heads, three axis simultaneous control of each head and DMNC 5th generation electrical discharging machining control system, best surface finish Ra≤0.2μm, Min. electrode wear ≤0.1%, standard equipped with 50A controller and Max machining efficiency ≥500mm3/min. It is ram type CNC EDM machine, the working table of A1880 is fixed, so it can load heavy molds without affecting the motion of X and Y axis while moving. Two separated heads on A1880 RAM EDM machine can do separated machining at the same time.
Main Dimensions of A1880 Double Heads CNC RAM EDM Machine
X×Y×Z travel: 1950×800×600mm(single head);
1200×800×600mm(double heads);
Working table dimension: 2000×1000mm;
Working tank on the table: 3500×1800×650mm
A1880 Double Heads CNC RAM EDM Machine Specifications
|
1 |
Working table dimension(L×W) |
2000×1000mm |
|
2 |
X×Y× Z axis travel |
Double heads 1200×800×600mm(each) |
|
Single head 1950×800×600mm |
||
|
3 |
Working tank dimension(L×W×H） |
3500×1800×650mm |
|
4 |
Highest level of working liquid |
420mm |
|
5 |
End of the spindle to the working table |
750-1350mm |
|
6 |
Capacity of the oil tank |
4900L |
|
7 |
Max weight of the electrode |
300kg |
|
8 |
Max weight of the workpiece |
5000kg |
|
9 |
Weight of machine |
13400kg |
|
10 |
Dimension of machine |
5204×5109×3861mm |
|
11 |
General input |
9kVA(50A) ×2 |
|
12 |
Input power |
3 Phase 380/50Hz |
|
13 |
CNC power generator |
A3-50 |
|
14 |
Max working current |
50A×2 |
|
15 |
Best surface finish |
Ra≤0.2µm |
|
16 |
≤0.05% |
|
|
17 |
Max machining efficiency |
≥500mm3/min |
|
18 |
Interpolation methods |
Straight line, arc, helix |
|
19 |
Accuracy compensation options |
Step pitch compensation of each axis, |
|
gap compensation |
||
|
20 |
1µm |
|
|
21 |
The outer dimension of the controller |
1250×550×1800mm |
|
22 |
Display |
15-inch touch screen |
|
23 |
Remote control |
different grades MFR0-3 |
If you want to know more about edm machine application, please visit our website.
Send product request
Other supplier products
 |
Windows Platform CNC EDM Machine | CNC wire cut EDM, which is a kind of spark erosion machine or electrical discharging machine, utilizes electrode wire (normally molybdenum wire or ... |
|
|
A1880 Double Heads CNC RAM EDM Machine | A1880Double Heads CNC RAM EDM Machine A1880 twin heads cnc edm die sinking machinehas two separated controllers and two separated machine heads,... |
 |
ZNC Die Sinking EDM Machine | ZNC EDMSinker has X and Y-axis manual control, and Z-axis automatic control. It can do one single job after manually set position, and job setting ... |
 |
Double Heads Large CNC EDM Machine | Double heads CNC EDM has two separated spindles and controllers, travel of table is much bigger than regular big EDM machines, each head can do mac... |
 |
KD-DZ430I EDM Hole Drilling Machine 400×300mm | KD-DZ430I EDM small hole drilling machineFeatures Φ0.3 to Φ3.0, the processing of ultra-thick workpieces with a thickness of less ... |
Same products
 |
Sewing Machine Spare Parts B2001-771-0A0 LBH-780 | Seller: Jinzen Intelligent Technology (Dongyang) Co., Ltd. | Sewing Machine Spare Parts B2001-771-0A0 LBH-780 One of the key features of our spare parts is t... |
 |
Digital rail wear gauge | Seller: 842518 | LJ-GM series digital rail wear measuring ruler is used to measure the vertical wear and lateral w... |
 |
Digital Switch Rail Lateral Wear Measuring Gauge | Seller: 842518 | The point rail is an important part of the switch. The train is guided to the main line or the si... |
 |
Digital sliding rail wear gauge | Seller: 842518 | LJ-HGM series sliding rail wear measuring ruler is used to measure the vertical wear value, side ... |
 |
Digital rail vertical frog wear gauge | Seller: 842518 | LJ-ZC-A rail frog wear measuring ruler mainly uses the unworn surface of the wing rails on both s... |
