A1880 Double Heads CNC RAM EDM Machine
A1880Double Heads CNC RAM EDM Machine
A1880 twin heads cnc edm die sinking machinehas two separated controllers and two separated machine heads, three axis simultaneous control of each head and DMNC 5th generation electrical discharging machining control system, best surface finish Ra≤0.2μm, Min. electrode wear ≤0.1%, standard equipped with 50A controller and Max machining efficiency ≥500mm3/min. It is ram type CNC EDM machine, the working table of A1880 is fixed, so it can load heavy molds without affecting the motion of X and Y axis while moving. Two separated heads on A1880 RAM EDM machine can do separated machining at the same time.
Main Dimensions of A1880 Double Heads CNC RAM EDM Machine
X×Y×Z travel: 1950×800×600mm(single head);
1200×800×600mm(double heads);
Working table dimension: 2000×1000mm;
Working tank on the table: 3500×1800×650mm
A1880 Double Heads CNC RAM EDM Machine Specifications
|
1 |
Working table dimension(L×W) |
2000×1000mm |
|
2 |
X×Y× Z axis travel |
Double heads 1200×800×600mm(each) |
|
Single head 1950×800×600mm |
||
|
3 |
Working tank dimension(L×W×H） |
3500×1800×650mm |
|
4 |
Highest level of working liquid |
420mm |
|
5 |
End of the spindle to the working table |
750-1350mm |
|
6 |
Capacity of the oil tank |
4900L |
|
7 |
Max weight of the electrode |
300kg |
|
8 |
Max weight of the workpiece |
5000kg |
|
9 |
Weight of machine |
13400kg |
|
10 |
Dimension of machine |
5204×5109×3861mm |
|
11 |
General input |
9kVA(50A) ×2 |
|
12 |
Input power |
3 Phase 380/50Hz |
|
13 |
CNC power generator |
A3-50 |
|
14 |
Max working current |
50A×2 |
|
15 |
Best surface finish |
Ra≤0.2µm |
|
16 |
≤0.05% |
|
|
17 |
Max machining efficiency |
≥500mm3/min |
|
18 |
Interpolation methods |
Straight line, arc, helix |
|
19 |
Accuracy compensation options |
Step pitch compensation of each axis, |
|
gap compensation |
||
|
20 |
1µm |
|
|
21 |
The outer dimension of the controller |
1250×550×1800mm |
|
22 |
Display |
15-inch touch screen |
|
23 |
Remote control |
different grades MFR0-3 |
If you want to know more about edm machine application, please visit our website.
在线联系供应商
Other supplier products
 |
A1880 Double Heads CNC RAM EDM Machine | A1880 twin heads CNC spark erosion machine has two separated controllers and two separated machine heads, three axis simultaneous control of each h... |
 |
DK7732 CNC EDM Wire Cutting Machine With X×Y=320×400mm | DK7732CNC EDM Wire Cutting Machine With X×Y=320×400mm Features of High-speed HF Power Φ0.18mm, the diameter will be &Ph... |
 |
General Purpose CNC EDM Wire Cut Machine F Structure | DK77 series cnc wire cutting machinehas non-resistors HF power with Max cutting speed higher than 300mm2/min, Max cutting thickness is higher than ... |
 |
ZNC Die Sinking EDM Machine | ZNC Die Sinking EDM Machine ZNC EDM Sinker has X and Y-axis manual control, and Z-axis automatic control. It can do one single job after manually ... |
 |
CNC EDM Hole Drilling Machine for Sale | CNC EDM drill, also known as CNC EDM small hole drilling machine, basically, there are three axis control(X, Y, Z), 4-axis control(X, Y, Z and W), ... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
