TTC100 Cable Tool Setter System
TTC100 cable setter system includes the z tool setterunit, 20mm thick mounting base,blow-cleaning device(optional), and standard measuring software. The TTC100 cnc z axis tool setteris a length tool setter in cnc z axis tool setter. TTC100 cnc tool zero setteris triggered when a tool touches the contact face. A trigger signal of cnc zero setteris sent to the machine tool controller via the hard-wired cable and the tool length is automatically calculated. Pioneer, a professionalcnc z axis zero toolsetter supplier in China, can provide you with high-precision CNC Z axis zero tool. If you are interested in our TTC100 CNC Z-axis zero tool setter, welcome to contact us!
Fanuc tool setter parameter
TTC100: |
|
Measuring direction |
-Z, 5mm |
Nominal height of the TTC100 tool setter |
80mm |
Repeatability (2σ) |
≤ 2 μm; |
Diameter of the touching face |
|
Hardness of the touch face |
HRA 90-93 |
Input voltage |
24±10% VDC |
Output load current |
50 mA |
Seal grade |
IP68 |
Application of TTC100 Cable Tool Setter System
TTC100 sets lengths parameter of cutting tools automatically on various types of CNC machine tools
TTC100 tool setter can detect tool wear and breakage automatically between two processes or after the CNC processing;
TTC100 tool setter can control the change of machining precision from the temperature change of the machine by checking cutting tool length.
Technology of TTC100 CNC Z-axis Zero Tool Setter System
Tool setter transmits a signal through cable, reversal connecting tool setter's power supply can reverse the state of the output signal;
There are two installing and fixing methods, one is to install directly, the other is to add a mounting base of 20mm thick, the tool setter's height can be raised from 80mm to 100mm.
One LED indicator light is used to display the tool setter's working state.
Pioneeris a professional probe factory, we provide touch probe, probe stylus, lathe probe, pioneer machine and tool, z setter cncand etc. Want to know more? Please contact us.
Send product request
Other supplier products
Problems That Should Be Paid Attention to when Calibrating the Touch Trigger Probe | touch triggerprobe is smaller than the static diameter After learning about the principle of probe calibration, we can easily explain why th... | |
RPS-L11M Radio Probe System | RPS-L11M radio probe system contains TP200 touch probe, RPDM transceiver, RSI-20M receiver and standard measuring software. The RPDM is a radio fre... | |
M3 Screw Probe Stylus | M3 screw CMM probe stylususually used for coordinate measuring machine probes and flexible scanning probes. The M3 screw CMM probe stylus has many ... | |
Optical Tool Setter | Harbin Pioneer's product design is based on the realization of satisfying their own functions and using more ideas to carry the connotation, then p... | |
TTC400A Cable Tool Setter Unit | TTC400A cable CNClathe tool settingunit is a product specially developed by our company for replacing some vulnerable tool setting units that is pa... |
Same products
Shoes Flexing Tester | Seller: Qinsun Instruments Co., Ltd | It's used for determining the flexibility resistance and or indicating the cracks od shoe or shoe... | |
Shoelace Abrasion Tester | Seller: Qinsun Instruments Co., Ltd | Application: This shoelace abrasion tester is used for shoelace against standard eyelet abrasion... | |
Heel Fatigue Tester | Seller: Qinsun Instruments Co., Ltd | Heel Fatigue Tester is used to determine the resistance of medium and high heels of ladies’... | |
Heel Impact Tester | Seller: Qinsun Instruments Co., Ltd | Heel Impact Tester is used to determine the impact strength of heels of ladies’shoes. Ap... | |
Ross Flex Tester | Seller: Qinsun Instruments Co., Ltd | Whole Sole ROSS Flexing Tester GT-KB05D To determine right angle flexing risistance for whole sol... |