Tubing Pup Joint and Crossover

Tubing: A pipe used in oil wells for oil recovery, gas production, water injection, and acid fracturing.

Casing: A pipe that has been drilled into the wall from the surface of the ground to prevent the wall from collapsing.

Drill pipe: A pipe used for drilling a hole.

Line pipe: A pipe used to transport oil and gas.

Coupling: A cylinder used to join two threaded tubes with internal threads.

Coupling: A tube used to make a coupling.

API thread: Pipe thread specified in API 5B standard, including tubing round thread, casing short round thread, casing long round thread, sleeve partial trapezoidal thread, line pipe thread, etc.

Special buckle: Non-API threaded type with special sealing performance, joint performance and other properties.

Failure: Deformation, fracture, surface damage and loss of original function under specific service conditions. The main forms of oil casing failure are: crushing, slipping, cracking, leakage, corrosion, adhesion, wear and the like.

Application of Tubing Pup Joint, Perforated Pup Jointand Crossover:

We can do premium connection pub joint and crossover. Such as :

TPCO's connection: TPCQ, TPEX, TPJC, TPG2,TPFJ

Baosteel connection: BGT1, BGT2

Changbao Steel: CBS1, CBS2, CBS3

VAM, VAM TOP, PH6, CS, SL-Apex, Bear

Technical Specifications of Tubing Pup Joint and Crossover:

SIZE / THREAD	GRADES	LENGTH	LENGTH	LENGTH	LENGTH	LENGTH	LENGTH
2 3/8" EUE
2 3/8" EUE	J55	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
2 3/8" EUE	L80	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
2 3/8" EUE	N80	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
2 3/8" EUE	P110	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
2 7/8" EUE
2 7/8" EUE	J55	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
2 7/8" EUE	L80	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
2 7/8" EUE	N80	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
2 7/8" EUE	P110	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
3 1/2" EUE
3 1/2" EUE	J55	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
2 7/8" EUE	L80	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
2 7/8" EUE	N80	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
2 7/8" EUE	P110	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
4 1/2" EUE
4 1/2" EUE	J55	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
4 1/2" EUE	L80	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
4 1/2" EUE	N80	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
4 1/2" EUE	P110	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
2 3/8" NUE
2 3/8" NUE	J55	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
2 3/8" NUE	L80	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
2 3/8" NUE	N80	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
2 3/8" NUE	P110	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
2 7/8" NUE
2 7/8" NUE	J55	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
2 7/8" NUE	L80	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
2 7/8" NUE	N80	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
2 7/8" NUE	P110	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
3 1/2" NUE
3 1/2" NUE	J55	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
3 1/2" NUE	L80	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
3 1/2" NUE	N80	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
3 1/2" NUE	P110	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
4 1/2" NUE
4 1/2" NUE	J55	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
4 1/2" NUE	L80	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
4 1/2" NUE	N80	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT
4 1/2" NUE	P110	2 FT	4 FT	6 FT	8 FT	10 FT	12 FT

If you want to buy high quality oilfield cementing tools, please contact us.

SAIGAO GROUPspecializing in design, research, and development, processing, and manufacturing. sales and export of machinery equipment, with leading products comprising various kinds of mudpumps, down-hole motors, any kinds of screen pipes, cementing tools as well as any kinds ofwellhead equipment.

Other supplier products

	Key Seat Wiper	Key Seat wiper Sliding sleeve type key seat reamer consists upper sub, mandrel, lower sub, sliding sleeve and so on, as shown in diagram. The slidi...
	Hydraulic Liner Hanger Polished Bore Receptacle	Hydraulic Liner Hanger Polished Bore ReceptacleMated with tie-back assembly, it can tieback the liner to the top of well and act as efficiency seal...
	LL-F Type Reverse Circulating Junk Basket	LLF type reverse circulating junk basketis designed to remove all types of small junks such as bit cones, cutters and hand tools from the bottom of...
	Valve	SAIGAO GROUPoffers a full range of valves for drilling and production operations. Gate valves are designed and manufactured in accordance with API ...
	Oil Country Tubular Goods(OCTG)	Oil country tubular goods (OCTG) is a family of seamless rolled products consisting of drill pipe, casing and tubing subjected to loading condition...

All supplier products

Same products

	Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series	Seller: Uratech USA Inc	TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m...
	Uratech Tool scoot cart for 50 taper tool holders	Seller: Uratech USA Inc	Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so...
	3 in1 Decoiler Leveler Feeder	Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd.	3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f...
	NC Servo Feeder (0.1-3.0mm)	Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd.	NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of...
	Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage	Seller: Uratech USA Inc	TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool...