Turret CNC Lathe CKD52
Turret CNC LatheCKD52
Product Description
The CNC Lathemachine toolcontrol system adopts Taiwan SYNTEC system, and it can also be equipped with CNC systems produced by other companies according to user requirements.
The base and bed of the machine tool are integrally cast iron, which has strong shock resistance and is not easy to deform. The bed is inclined at 30°, and the large carriage and tool post are inclined, which makes the operation of the machine tool and chip removal very convenient. The appearance design of the machine tool is beautiful, and it takes up little space.
|
Item |
Unit |
CKD52 |
|
|
Capacity |
Max swing over bed |
mm |
500 |
|
mm |
480 |
||
|
mm |
380 |
||
|
Travel |
X axis travel |
mm |
250 |
|
Z axis travel |
mm |
400 |
|
|
Precision |
Spindle runout |
mm |
|
|
X/Z axis reposition precision |
mm |
||
|
Spindle |
Spindle speed |
rpm |
4000 |
|
Chuck diameter |
inch |
8 |
|
|
Spindle nose |
A2-6 |
||
|
Spindle bore |
mm |
63 |
|
|
Max bar diameter |
mm |
52 |
|
Slant Bed CNC Turret Lathewith Tailstock｜CNC Lathe with X Z Axis
The main shaft adopts a high-precision main shaft, which contains Swiss SKF precision main shaft bearings. The main shaft flange can be directly installed with a three-jaw self-centering hydraulic chuck or other elastic chuck.
The transmission part of the machine tool adopts the high-precision Japanese THK ball screw and high-speed linear slide of the well-known Japanese THK 35-type. The X-axis and Z-axis adopt the high-rigidity linear slide, and the track and the track are optimized through calculation. Span, low resistance, high rigidity, high precision, displacement speed up to 24m/min, provide work efficiency and shorten processing time.
Send product request
Other supplier products
 |
Turning and Milling CNC Lathe CK46DY8 | Turning and Milling CNC LatheCK46DY8 Product Description The CNCmachinebed is integrally cast iron, and the machine bed is inclined at 30°, w... |
 |
Gang Type CNC Lathe CK46 | Gang Type CNC Lathe CK46 Product Description The LeichmanCNC machinetool control system adopts Taiwan SYNTEC system, and other CNC systems are op... |
 |
WLL series CNC Spinning and Turning Machine | WLL series CNC Spinning and Turning Machine Product Description WLL seriesCNC metal spinning machine(Single Roller) is especially developed to sp... |
|
|
Turret CNC Lathe CKD52 | Turret CNC LatheCKD52 Product Description The CNC Lathemachine toolcontrol system adopts Taiwan SYNTEC system, and it can also be equipped with C... |
Same products
 |
protective clothing Antisynthetic blood penetration tester | Seller: Qinsun Instruments Co., Ltd | It is applicable to the resistance of the protective clothing to the synthetic blood penetration ... |
 |
Respirator Fit Tester | Seller: Qinsun Instruments Co., Ltd | The Protective Mask Leak Tester is a portable device designed to detect the service performance a... |
 |
Floor coverings flammability tester | Seller: Qinsun Instruments Co., Ltd | Applications:TheFlammability Test Chamberis used to test the effects of a small source of ignitio... |
 |
Cantilever Fabric Stiffness Tester | Seller: Qinsun Instruments Co., Ltd | Application: Fabric Stiffness Tester, is a practical equipment to determine the bending height, ... |
 |
Automatic Wrinkle Recovery Tester | Seller: Qinsun Instruments Co., Ltd | The main principle of the wrinkle recovery tester is to apply a predetermined pressure to the spe... |
