KRD15 Pneumatic Horizontal Shock Response Spectrum Test System
KRD15 pneumatic horizontal shock response spectrumtester is the special equipment for spectrum specification shock test, so it can also be called spectrum specification shock machine. The advantages of thissrs test equipmentare convenient energy adjustment, simple and compact structure, easy operation, and a good repeatability of test results. It is the srs shock response spectrumtester, using compressed gas energy to provide impact energy, and the shock hammer is pushed to impact the resonance plate to produce high-energy impact. It can meet the requirements of various spectrum specifications established by the current aerospace system, mainly applied in the industries of aerospace, aviation, and ships.
FEATURES OF KRD15 PNEUMATIC HORIZONTAL SHOCK RESPONSE SPECTRUM TEST SYSTEM
Adopts pneumatic energy storage to drive the shock hammer, with a large driving force, reliable structure, and fast response speed
Adjust the driving shock energy by adjusting the air pressure, which is easy to operate and high in efficiency
Two-level safety switch is designed to fully protect the safety of operators
Designed with a special base, is mainly to raise the installation position of the response plate, which is convenient for users to install the specimen and adjust the gasket operation
All operations are completed on the integrated measurement and control software, which is easy to use and has a high degree of automation
TABLE OF KRD15 PNEUMATIC HORIZONTAL SHOCK RESPONSE SPECTRUM TEST SYSTEM
The main structure of the shock response spectrum testingtester mainly includes a test machine table, a shock response spectrum control measurement analysis system, etc.
KRD15 pneumatic horizontal shock response spectrum tester mechanical system consists of a shock table, a response plate, a pneumatic self-locking mechanism, a pneumatic return device, etc.
The specimen is installed on the response plate of the horizontal shock response spectrum tester. When the shock hammer shocks the response plate, the specimen on the response plate produces the corresponding move after the shock is applied. The acceleration sensor collects the acceleration on the response plate and performs the response spectrum analysis.
ACTUAL PHYSICAL SYSTEM IS DIVIDED INTO MULTIPLE SINGLE DOF SYSTEM PHYSICAL MODELS
An actual physical system can be decomposed into multiple different single-DOF systems. For each single-degree-of-freedom system, analyze and calculate the shock response spectrum, and finally synthesize it to get the shock response spectrum of the entire system, as shown in Figure 1 below.
CME Technology Co., Ltd. was established in 2006, specializing in the research, development and manufacturing of mechanical environment and reliability test equipment, our mechanical test equipmentproducts including shock /bump testing machine, drop tester, transportation simulation test table, hydraulic vibration shakers, multi-DOF motion simulation table, centrifugal constant acceleration tester, packaging test machine and etc.
Send product request
Other supplier products
 |
KRD13 HIGH ENERGY SHOCK TEST SYSTEM | KRD13 series pneumatic high-energy shock test system is an automatic pneumatic lifting vertical pressure shock testing equipment. The high energy t... |
|
|
KRD15 Pneumatic Horizontal Shock Response Spectrum Test System | KRD15 pneumatic horizontal shock response spectrumtester is the special equipment for spectrum specification shock test, so it can also be called s... |
 |
KRD10 Hydraulic Vertical Shock Test System | KRD10series is a full-automatic hydraulic lifting vertical shock testing machine, with the state-of-the-art design, high degree of automation, simp... |
 |
KRD17 BIDIRECTIONAL VERTICAL SHOCK TEST SYSTEM | KRD17 series is a new designed fully automatic pneumatic lifting bidirectional shock test system with high degree of automation, simple operation a... |
 |
KRD13 High Energy Shock Test System | KRD13 series pneumatic high-energy shock test system is an automatic pneumatic lifting vertical pressure mechanical shock and vibration testingequi... |
Same products
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | Seller: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | Seller: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
 |
3 in1 Decoiler Leveler Feeder | Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd. | 3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f... |
 |
NC Servo Feeder (0.1-3.0mm) | Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd. | NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of... |
 |
Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage | Seller: Uratech USA Inc | TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool... |
