KRD15 Pneumatic Horizontal Shock Response Spectrum Test System
KRD15 pneumatic horizontal shock response spectrumtester is the special equipment for spectrum specification shock test, so it can also be called spectrum specification shock machine. The advantages of thissrs test equipmentare convenient energy adjustment, simple and compact structure, easy operation, and a good repeatability of test results. It is the srs shock response spectrumtester, using compressed gas energy to provide impact energy, and the shock hammer is pushed to impact the resonance plate to produce high-energy impact. It can meet the requirements of various spectrum specifications established by the current aerospace system, mainly applied in the industries of aerospace, aviation, and ships.
FEATURES OF KRD15 PNEUMATIC HORIZONTAL SHOCK RESPONSE SPECTRUM TEST SYSTEM
Adopts pneumatic energy storage to drive the shock hammer, with a large driving force, reliable structure, and fast response speed
Adjust the driving shock energy by adjusting the air pressure, which is easy to operate and high in efficiency
Two-level safety switch is designed to fully protect the safety of operators
Designed with a special base, is mainly to raise the installation position of the response plate, which is convenient for users to install the specimen and adjust the gasket operation
All operations are completed on the integrated measurement and control software, which is easy to use and has a high degree of automation
TABLE OF KRD15 PNEUMATIC HORIZONTAL SHOCK RESPONSE SPECTRUM TEST SYSTEM
The main structure of the shock response spectrum testingtester mainly includes a test machine table, a shock response spectrum control measurement analysis system, etc.
KRD15 pneumatic horizontal shock response spectrum tester mechanical system consists of a shock table, a response plate, a pneumatic self-locking mechanism, a pneumatic return device, etc.
The specimen is installed on the response plate of the horizontal shock response spectrum tester. When the shock hammer shocks the response plate, the specimen on the response plate produces the corresponding move after the shock is applied. The acceleration sensor collects the acceleration on the response plate and performs the response spectrum analysis.
ACTUAL PHYSICAL SYSTEM IS DIVIDED INTO MULTIPLE SINGLE DOF SYSTEM PHYSICAL MODELS
An actual physical system can be decomposed into multiple different single-DOF systems. For each single-degree-of-freedom system, analyze and calculate the shock response spectrum, and finally synthesize it to get the shock response spectrum of the entire system, as shown in Figure 1 below.
CME Technology Co., Ltd. was established in 2006, specializing in the research, development and manufacturing of mechanical environment and reliability test equipment, our mechanical test equipmentproducts including shock /bump testing machine, drop tester, transportation simulation test table, hydraulic vibration shakers, multi-DOF motion simulation table, centrifugal constant acceleration tester, packaging test machine and etc.
在线联系供应商
Other supplier products
 |
KRD17 BIDIRECTIONAL VERTICAL SHOCK TEST SYSTEM | KRD17 series is a new designed fully automatic pneumatic lifting bidirectional shock test system with high degree of automation, simple operation a... |
 |
KRD70 Hydraulic Vibration Shaker | KRD70 series hydraulic vibration shakeris an electronic hydraulic servo vibration test machine with the advantages of fast response speed, high ant... |
 |
KRD13 High Energy Shock Test System | KRD13 series pneumatic high-energy shock test system is an automatic pneumatic lifting vertical pressure mechanical shock and vibration testingequi... |
 |
Multi-Axial Simulation Table | WHAT IS MULTI-AXIAL SIMULATION TABLE? Multi-Axial Simulation Table (MAST) simulates the vibration of real-world environments in the laboratory. El... |
 |
KRD20 PNEUMATIC BUMP TEST MACHINE | KRD20 bump test machineis a fully automatic pneumatic lift vertical bump test system. It is applicable to measure and determine the bump resistance... |
Same products
 |
GT-DG250 轧辊机 | 卖方: 肇庆古雷特科技有限公司 | • 产品描述 GT-DG250 缩管机采用一组对辊组件，根据需求加工孔位，逐孔逐级（由大到小）对管材进行缩径。可用于加工铜、铁、不锈钢、铝等材质的圆管、方管、扁管、椭圆管。 &bu... |
 |
Double Spindle Lathe NL251D | 卖方: Lecn Anhui Co., Ltd | A is an advanced CNC lathe equipped with two spindles, typically referred to as the main spindle ... |
 |
Automobile Torsion Beam Milling Machine X8220125 | 卖方: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 1250-1550 mm workpiece len... |
 |
Joint Cross Machine CZ821030/TZ820510 | 卖方: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 100-300 mm workpiece lengt... |
 |
Break Cam Milling Machine CM0525 | 卖方: Lecn Anhui Co., Ltd | can precision milling cam diameter of 250 mm, which is suitable for milling automobile brake cams... |
