TP60 Touch Trigger Probe
TP60 trigger probe includes a trigger probe unit and a taper shank. TP60 probe is a trigger probe, it can used to measure all kinds of solid materials workpieces. TP60 trigger probe is suitable for various specifications of machine centers, CNC boring and milling machines, and drilling-tapping machine centers, etc.
TP60 trigger probe includes a trigger probe unit and a taper shank. TP60 probe is a trigger probe, it can used to measure all kinds of solid materials workpieces. TP60 trigger probe is suitable for various specifications of machine centers, CNC boring and milling machines, and drilling-tapping machine centers, etc.
Parameter of TP60 Touch TriggerProbe
|
TP60： |
|
|
Measuring direction |
±X，±Y，+Z |
|
Arbitrary direction swinging angle |
X-Y±12°, Z +5 mm |
|
Repeatability （2σ） |
≤ 2 μm； |
|
Trigger force in Z direction |
1000（g） |
|
Trigger force in X-Y direction |
65-130（g） |
|
Battery model |
CR2, 3.0 V, 800 mAh |
|
Model of the standard stylus |
M4-P50-RB6-S36 |
|
Seal grade |
IP68 |
Application of TP60 Touch Trigger Probe
TP60 probe can be used in various of milling machine,machine center,boring machine and so on.
TP60 can be used on non-conductive workpieces (resin, ceramics, etc.) and non-conductive machine tools (ceramic bearings, etc.)
TP60 is suitable for workpiece alignment and simple inspection operations.
Technical Characteristics of TP60 Touch Trigger Probe
Can be configured with different specifications of taper shank.
The coaxial of probe and shank can be adjusted (the factory precision: ≤5 μm);
Six LED indicator lights are used to show the trigger state of the probe.
For more information about cnc probing softwareand machine tool probes, please feel free to contact us!
Send product request
Other supplier products
 |
EP40 Electrical Probe | EP40 electric probe includes a electric probe unit and a 20mm diameter cylindrical shank. The electric probe senses the contact with the metal work... |
 |
CNC Machine Tool Touch Probe System | Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradua... |
 |
OPS-30 Optical CNC Probe System | OPS-30 optical probe system with special cnc probe programming contains xyz probe cnc-OP510 optical infrared probe, OSI-20 receiver and standard me... |
 |
Radio Probe System | Radio Probe System The wts radio communication probe system is suitable for various complex working conditions in the processing of CNC machine too... |
 |
M2 Screw Probe Stylus | M2 touch probe cmmstylus usually used for industry-standard coordinate measuring machine probes. The M2 screw probe CMM stylus has many different t... |
Same products
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | Seller: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | Seller: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
 |
3 in1 Decoiler Leveler Feeder | Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd. | 3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f... |
 |
NC Servo Feeder (0.1-3.0mm) | Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd. | NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of... |
 |
Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage | Seller: Uratech USA Inc | TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool... |
