TP60 Touch Trigger Probe
TP60 trigger probe includes a trigger probe unit and a taper shank. TP60 probe is a trigger probe, it can used to measure all kinds of solid materials workpieces. TP60 trigger probe is suitable for various specifications of machine centers, CNC boring and milling machines, and drilling-tapping machine centers, etc.
TP60 trigger probe includes a trigger probe unit and a taper shank. TP60 probe is a trigger probe, it can used to measure all kinds of solid materials workpieces. TP60 trigger probe is suitable for various specifications of machine centers, CNC boring and milling machines, and drilling-tapping machine centers, etc.
Parameter of TP60 Touch TriggerProbe
|
TP60： |
|
|
Measuring direction |
±X，±Y，+Z |
|
Arbitrary direction swinging angle |
X-Y±12°, Z +5 mm |
|
Repeatability （2σ） |
≤ 2 μm； |
|
Trigger force in Z direction |
1000（g） |
|
Trigger force in X-Y direction |
65-130（g） |
|
Battery model |
CR2, 3.0 V, 800 mAh |
|
Model of the standard stylus |
M4-P50-RB6-S36 |
|
Seal grade |
IP68 |
Application of TP60 Touch Trigger Probe
TP60 probe can be used in various of milling machine,machine center,boring machine and so on.
TP60 can be used on non-conductive workpieces (resin, ceramics, etc.) and non-conductive machine tools (ceramic bearings, etc.)
TP60 is suitable for workpiece alignment and simple inspection operations.
Technical Characteristics of TP60 Touch Trigger Probe
Can be configured with different specifications of taper shank.
The coaxial of probe and shank can be adjusted (the factory precision: ≤5 μm);
Six LED indicator lights are used to show the trigger state of the probe.
For more information about cnc probing softwareand machine tool probes, please feel free to contact us!
在线联系供应商
Other supplier products
 |
M2 Screw Probe Stylus | M2 touch probe cmmstylus usually used for industry-standard coordinate measuring machine probes. The M2 screw probe CMM stylus has many different t... |
 |
Manual Probe | Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradua... |
 |
Radio Probe System | The radio communication probe systemis suitable for various complex working conditions in the processing of CNC machine tools, mainly suitable for ... |
 |
RPS-L11M Radio Probe Systemc | RPS-L11M radio probe system contains TP200 touch probe, RPDM transceiver, RSI-20M receiver and standard measuring software, applied in lathe probe,... |
 |
CNC Machine Tool Setter System | Harbin Pioneer M&E Technical Development Co, Ltd, cnc tool presetter manufacturers, was founded by Mr. Baichun Sun in 1995. After several years... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
