STEEL PDC BIT
The drill body of the Steel PDC Bitis made of a whole piece of alloy steel by machining, and the cutting teeth are made by welding the composite piece on the tungsten carbide material tooth post, and then the cutting teeth are inlaid on the drill body, and the diameter-preserving part is also inlaid with diamond blocks or other wear-resistant materials on the drill body.
Steel PDC bit is suitable for fast drilling in the stratum which is easy to drill at the bottom of the compressive strength without gravel, and it has a wide flow channel also in the timely transportation of rock brow.
Different Types Of Steel PDC Bit For Sale
Steel PDC Drill Bit
Steel PDC bits are mainly used in difficult to drill formations with high gravel and compressive strength.
Features Of Steel PDC Bit
The Steel PDC bit is a one-piece bit, and the bit parts should not fall off during drilling, so it can be used at higher speed and can withstand greater lateral load without downhole accidents.
The Steel Body PDC bitmainly relies on the cutting action of the PDC composite piece to break the rock, similar to the cutting principle of the scraper bit, with low torque and good stability during drilling, and high mechanical drilling speed under smaller drilling pressure and high rotational speed.
Steel PDC bits are wear-resistant and long-lasting when used correctly, and are suitable for deep wells and abrasive formations.
Advantages Of Steel Body Over Matrix Body PDC Bits
The entire body of the Steel PDC Bitis made of medium carbon steel and machined.The PDC cutting teeth are fixed to the crown of the drill by means of a pressure fit. The crown of the bit is surface hardened (sprayed with tungsten carbide wear layer, carburized, etc.) to increase its resistance to erosion. The main advantage of this type of drill bit is the simplicity of the manufacturing process. Steel Body Bits have a larger chip flute area, higher flank height and narrower flank thickness than tire body bits.
SML produces Steel Body PDC bits with tungsten carbide dressing wear layer, which enhances the wear resistance and erosion resistance of the steel body PDC bit flanks; improves the hydraulic performance for drilling in soft strata, resulting in better chip evacuation; enhances the protection of cutting teeth; improves the reliability and erosion resistance of the bit; and combines the advantages of tire body bits and steel bits to increase the mechanical drilling speed.
Send product request
Other supplier products
 |
MATRIX PDC BIT | PDC bit is the abbreviation of Polycrystalline Diamond Compact Bit, also known as Polycrystalline Diamond Cutting Block Bit or Composite Chip Tooth... |
 |
STEEL TOOTH BIT | The teeth of Steel Tooth Bitare made by milling and processing of tooth wheel blanks, mainly wedge-type teeth, and the structural parameters of the... |
 |
TCI Tricone Bit | Under the effect of the WOB and the twist of the drill string, the teeth of the tci drill bitare crushed and eaten into the rock, and at the same t... |
 |
PDC CORE BIT | PDC core bits, also called hollow bits, are a kind of thin tubular multi-tooth bits with carbide chips embedded in them. The PDC core drill bit is ... |
 |
PDC CORE BIT | PDC core bits, also known as hollow bits, are tubular multi-toothed instruments embedded with carbide chips. Outfitted with carbide inserts, they e... |
Same products
 |
Step Drill | Seller: SINOLITE TOOLS LTD. | Step Drill Step Drill Bits | Step Drill Bit Set Supplier & Wholesale Step drill bitsare a s... |
 |
Twist Drill | Seller: SINOLITE TOOLS LTD. | Twist Drill Precision Twist Drill Bits | HSS, Cobalt & Carbide Drills Precision twist drill... |
 |
Metal Cutting Tools | Seller: SINOLITE TOOLS LTD. | Metal Cutting Tools Metal Cutting Power Tools & Cutting Tools for Metal | Sinolite Looking ... |
 |
Taper Shank Drill | Seller: SINOLITE TOOLS LTD. | Taper Shank Drill Taper Shank Drill Bits | HSS Taper Shank Drills Supplier Taper shank drill bi... |
 |
Traditional Welding in Furniture Manufacturing | Seller: Traditional Welding in Furniture Manufacturing | Traditional Welding in Furniture Manufacturing Pain Points of Traditional welding operat... |
