TCI Tricone Bit
Under the effect of the WOB and the twist of the drill string, the teeth of the tci tricone drill bitsare crushed and eaten into the rock, and at the same time there is a corresponding sliding to shear the rock. When it rolls at the bottom of the well, the teeth on it will impact and press into the formation in sequence. This effect can crush a part of the rock at the bottom of the well, and at the same time rely on its sliding to weaken the shearing effect of the teeth. The remaining rocks in between break all the rocks at the bottom of the well and allow the wellbore to be extended. Explore our wide range of tci drill bitfor sale, each designed for optimal drilling efficiency and durability.
TCI Tricone Bit Performance
The roller cone bit has the functions of impacting, crushing and shearing the formation rock when it rotates, so the roller cone bit can adapt to various soft, medium and hard formations.
The 8 1/2'' inch IADC437 roller cone bit is suitable for low compressive strength and high drillability of large sections of very soft ground, such as shale, clay, sandstone, conglomerate, etc.
Our TCI bit is engineered for exceptional performance in challenging drilling conditions, offering enhanced durability and drilling speed.
As a professional drill bit suppliers,SML has high-quality pdc bit,Welcome to contact us if needed.
Send product request
Other supplier products
 |
MATRIX PDC BIT | Matrix body pdc bitsare specialized cutting tools designed for drilling in hard and abrasive formations, typically encountered in the oil and gas i... |
 |
STEEL PDC BIT | The drill body of the Steel PDC Bitis made of a whole piece of alloy steel by machining, and the cutting teeth are made by welding the composite pi... |
 |
Hybrid Drill Bit | The hybrid bit uses a mixed cutting method. The tricone bit is to be broken by impact on the stratum, and then the PDC blade is cut to effectively ... |
 |
Hybrid Drill Bit | The hybrid bituses a mixed cutting method. The tricone bit is to be broken by impact on the stratum, and then the PDC blade is cut to effectively p... |
 |
Steel PDC Drill Bit | The entire bit body of the PDC steel bit is made of medium carbon steel and machined using a fabrication process. The bit crown is treated with a s... |
Same products
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | Seller: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | Seller: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
 |
3 in1 Decoiler Leveler Feeder | Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd. | 3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f... |
 |
NC Servo Feeder (0.1-3.0mm) | Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd. | NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of... |
 |
Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage | Seller: Uratech USA Inc | TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool... |
