Steel PDC Drill Bit
The entire bit body of the pcd drill bitis made of medium carbon steel and machined using a fabrication process. The bit crown is treated with a surface hardening process (sprayed tungsten carbide wear layer, carburized) to enhance erosion resistance.
Specification Of Steel PDC Drag Bit Drilling
|
Diameter |
Wings |
|
|
mm |
inch |
|
|
51 |
2” |
3 |
|
65 |
2 1/2” |
3 |
|
76 |
3” |
3 |
|
89 |
3 1/2” |
3 |
|
92 |
3 5/8” |
3/4 |
|
95 |
3 3/4” |
3/4 |
|
98 |
3 7/8” |
3/4 |
|
102 |
4” |
3/4 |
|
108 |
4 1/4” |
3/4 |
|
114 |
4 1/2” |
3/4 |
|
127 |
5” |
3/4 |
|
133 |
5 1/4” |
3/4 |
|
146 |
5 3/4” |
3/4 |
|
152 |
6” |
3/4 |
|
171 |
6 3/4” |
2003/4/5 |
|
191 |
7 1/2” |
2003/4/5 |
|
216 |
8 1/2” |
2004/5/6 |
Steel PDCBitPerformance
The drill head is treated with the surface hardening process (spraying tungsten carbide wear -resistant layer) to enhance its erosion resistance. The advantage of steel body is that the manufacturing cost is low and easy to repair.
Send product request
Other supplier products
 |
MATRIX PDC BIT | Matrix body pdc bitsare specialized cutting tools designed for drilling in hard and abrasive formations, typically encountered in the oil and gas i... |
 |
STEEL PDC BIT | The drill body of the steel body pdc bitis made of a whole piece of alloy steel by machining, and the cutting teeth are made by welding the composi... |
 |
SHAPED PDC CUTTER | Polycrystalline Diamond Composite (PDC) merges thin layers of diamond with a cemented carbide base, blending diamond's wear resistance with carbide... |
 |
Steel PDC Drill Bit | The entire bit body of the PDC steel bit is made of medium carbon steel and machined using a fabrication process. The bit crown is treated with a s... |
 |
TCI BIT | The TCI bithas the characteristics of wide adaptability to the stratum and high mechanical drilling speed. SML's products conform to the API standa... |
Same products
 |
railway signal torch tricolor railway signal light | Seller: 834406 | 铁路奇格尔灯 可广泛应用于铁路、船舶等交通运输行业和一些特殊行业，如信号指示、安全警示和工作照明。 |
 |
Grinding Head X 1/4inch | Seller: Keying Abrasives | KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s... |
 |
Grinding Head X 1-3/16inch | Seller: Keying Abrasives | KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s... |
 |
Grinding Head X | Seller: Keying Abrasives | KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s... |
 |
Grinding Head G - T Shape (T) | Seller: Keying Abrasives | KEYING Mounted Head is made of imported raw materials and special equipment with automatic produc... |
