Telematics Box HQT401
Telematics box, as the so-called t-box, vehicle black box or smart box, is being widely used in fields such as insurance, periodic tenancy, fleet management, driver behavior management, electric vehicle remote management, and stolen vehicle recovery (SVR). The tbox makes a very important role in the whole telematics system.
In-house designed, developed and manufactured by Hopechart, the t-box HQT401 comes with GPS and GNSS positioning module, 4G LTE module, Wi-Fi hotspot, Bluetooth, internal battery, CAN Bus and RS232 ports. As the tbox HQT401 adopts design of vehicular gauge, it can stand extreme working environment and conditions. The tbox can realize vehicle remote tracking and monitoring, vehicle control, security detection and warning, vehicle remote diagnostics and breakdown call. Like our other tbox or tachograph products, the HQT401 can be also work together with the double Din Android multimedia screen.
II.Scope of application of Vehicle Tbox 4G LTE:
Vehicle location monitoring, vehicle status monitoring, vehicle control, firmware upgrade, B-CALL, CAN Bus tachograph, remote diagnostics, driving behavior analysis, hotspot share, wireless communication, information encryption, vehicle anti-theft.III.Summary of Vehicle Tbox 4G LTE
The Tbox 4G LTE can be installed under the dashboard, under the seat of driver and in the trunk. It can be fixed with screws, Velcro or by customized method. Adaptively powered by vehicle power 12V or 24V, it can interact with vehicle via CAN interface.Tbox has been integrated with MCU, data storage module, GNSS module, wireless communication module, and CAN transceiver module. Meanwhile, the preserved interfaces support extension of external devices, such as infotainment screen, and all kinds of sensors.Ⅳ. Function & feature of Vehicle Tbox 4G LTE
Category |
Function |
Description |
Time & date |
Time & date |
Provide time and date (accurate to 1ms) |
Automatic self-check |
Automatic time correction, error less than 5s per day |
|
Positioning |
Support GPS/BD positioning and A-GPS, accuracy 5m. Support mobile base tower positioning. |
|
Communication |
Mobile telecom |
FDD-LTE/ TDD-LTE/ TD-SCDMA/ UMTS/ EDGE/ GSM/ EVDO/ CDMA |
SMS |
Support parameter inquiry and setup by sending SMS order. |
|
Multi-platform connection |
Support connection with two or more platforms. Support sending different data to different platforms. |
|
BT |
Bluetooth 4.0 BLE, for data communication |
|
Data gathering |
CANdata gathering |
Can gather vehicle data through 3 channels of high speed CAN |
Audio signal gathering |
With noise suppression feature, support external passive MIC, support audio monitoring |
|
Voltage gathering |
Gather and report main battery voltage and backup battery capacity |
|
Data storage |
Real-time data storage |
The collected real-time data can be saved into the Tbox internal storage medium based on interval of 10ms. These data can be readouton computer. |
Datarecovering |
If network disconnects, the real-time data will be saved into the local storage medium and be resent to the monitoring platform once network recovers. |
|
Independentoperation |
Tbox can continue to work when external power cuts off. The data of the first 30 minutes after power cuts off can be guaranteed to be sent to the platform. |
|
Driverbehavior |
Analyzing driver behavior in real time, the device will report the events to the back-office platform once detecting bad driving behavior, including harsh acceleration, harsh turn, harsh deceleration and cornering without light. |
|
Devicemanagement |
Power management |
Five modes: working mode, monitoring mode, sleep mode, off mode, storage mode |
Self-check |
When being powered on and used, device will automatically check status of GPS and network and display the status by LED indicators. |
|
Device control |
Support remote and local program upgrading, parameter configuration and etc. |
|
Datainteraction |
USB |
Data export, parameter configuration and local upgrading, communication with display screen. |
RS232 |
Parameter configuration, connection with external sensors. |
|
CAN |
Communication withCAN Bus and vehicle body. Support ISO 11898and SAE J1939. |
|
Hardwareencryption |
Support SM3, SM4, universal symmetric algorithm and asymmetric algorithm. |
|
OTA |
Support upgrading other ECUs of vehicle, which need to be confirmed with ECU manufacturers. |
|
B-CALL |
Support breakdown call |
|
Wi-Fi |
Provide Wi-Fi hotspot |
V. Definition of Interface
PIN |
Function |
Remark |
PIN |
Function |
Remark |
|
1 |
KL15 |
ACCsignal |
21 |
Spare |
||
2 |
IG_ON |
22 |
Charging signal |
Highlevel wakeup |
||
3 |
GND |
23 |
Charging signal |
Low level wakeup |
||
4 |
Digital signal 1 |
24 |
Spare |
|||
5 |
MIC OUT GND |
25 |
MIC OUT |
Can be connected to IHU |
||
6 |
MIC IN |
Micro input |
26 |
MIC IN GND |
||
7 |
Digital Signal 2 |
27 |
Spare |
|||
8 |
LINE OUT |
28 |
LINE OUT - |
|||
9 |
Speaker + |
29 |
Speaker - |
|||
10 |
BTN GND |
30 |
BTN |
|||
11 |
Digital Signal 3 |
31 |
BTN CONN |
|||
12 |
Spare |
32 |
24V/ 12V output |
|||
13 |
5Vpower |
500mA output |
33 |
Spare |
||
14 |
RS232_RX1 |
34 |
RS232_TX1 |
|||
15 |
RS232_TX2 |
35 |
RS232_RX2 |
|||
16 |
Spare |
36 |
Spare |
|||
17 |
CAN3_H |
Conform to CAN2.0B |
37 |
CAN3_L |
Conform to CAN2.0B |
|
18 |
CAN2_L |
Conform to CAN2.0B |
38 |
CAN2_H |
Conform to CAN2.0B |
|
19 |
CAN1_H |
Conform to CAN2.0B, support CAN wakeup |
39 |
CAN1_L |
Conform to CAN2.0B, support CAN wakeup |
|
20 |
KL30 |
Power |
40 |
KL31 |
GND |
VI. Appearance of Vehicle Tbox 4G LTE
Dimension: 138mm*78mm*30mmWeight: max. 400g (with battery)Material of housing: ABS+PCVII. Product quality design of Vehicle Tbox 4G LTE
Appendix.Positioning & networking of Vehicle Tbox 4G LTE
1)Positioning feature
No. |
Item |
Spec |
1 |
Cold start time |
≤35S (in open environment) |
2 |
Reacquisition time |
≤1S (in open environment) |
3 |
Hot start time |
<1.5S(in open environment) |
4 |
Static drift |
<10m |
5 |
Positioning accuracy |
5m (in open environment) |
6 |
Acquisition sensitivity |
-150dBm |
7 |
Tracking sensitivity |
-160dBm |
8 |
A-GPS |
Support |
2)Networking features
No. |
Item |
Spec |
1 |
Communication mode |
FDD-LTE/TDD-LTE/TD-SCDMA/UMTS/EDGE/ GSM/EVDO/CDMA; |
2 |
Range of band |
LTE-TDD Quad-band Band 38/39/40/41; LTE-FDD Tri-band Band 1/3/8; TD-SCDMA Dual-band Band 34/39; UMTS Dual-band Band 1/8; GSM Dual-band B3/B8; EVDO BC0; |
3 |
Maximum transmitting power |
Class 4 (2 W) for GSM900 Class 1 (1 W) for GSM1800 Class E2 (0.5 W) for EDGE900 Class E2 (0.4 W) for EDGE1800 Class 3 (0.25 W) for TD-LTE/FDD-LTE/TD-SCDMA/UMTS |
4 |
Receive sensitivity |
Acquisition -158dBm Tracking -162dBm |
5 |
RF impedance |
50Ω |
Send product request
Other supplier products
MDVR | MDVR will play an important role in protecting social civilization, social harmony and people's travel safety. Vehicle monitoring systems also play... | |
Head Unit | Parkopedia to provide Mercedes-Benz cars with parking data for off and on-street parking as well as transaction services including payments, reserv... | |
SD card MDVR | Vehicle-mounted digital video recorders, also known as MDVR (Mobile Digital Video Recording System). Theadopts the same audio and video acquisition... | |
Telematics Box Manufacturer | Vehicle networking means the huge interactive network which revolves around the user's cars and is composed of the information of the vehicle locat... | |
Driving Patterns | State Farm is expanding its Drive Safe and Save usage-based insurance program to include cars equipped with Ford's Sync.Also known as "pay as you g... |
Same products
330037 Communication Unit Change-Over Table HS50 Original Used | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | pantallas china brand bearing bearing supplier mobil dte 10 Reflow Wave Soldering Chain Cleaner T... | |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | Seller: 782364 | This GF6018A high precision multi-product calibrator is compliance with national verification reg... | |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | Seller: 782364 | DESCRIPTIONThe GF6018A clamp type multimeter calibrator with RS-232 port, it can be connected w... | |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | Seller: 782364 | This GF6018A high precision multi-product calibrator is compliance with national verification reg... | |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | Seller: 782364 | APPLICATION ■ Power plant; ■ Universities; ■ Panel manufacturer; ■ Research institutes; ■ Electr... |