BKXGN-12 Solid Insulated Switchgear

• 

Product Description

BKXGN-12 is suitable for middle voltage power distribution system with a rated voltage of less than 10kV and a rated current under 1250A. It is more reliable than the SF6 ring main unit, and is more suitable for a wider range of applications.

• No SF6 gas inside, avoiding pressure tank designing.

• All live parts are sealed or embedded in the epoxy resin and silicon rubber, fully insulated and wholly enclosed structure, safety protection level: IP67.

• All operating mechanism sealed inside a box, truly maintenance-free.

• Enhanced phase separation design, independent phase insulation to avoid the fault between phases.

•Standard modular design to facilitate unit extension, modification and replacement.

• Switch working position of each phase could be observed independently.

• Safe, smart, environment-friendly, flexible assembly enabled, good performance to apply in special environments.

• Multiple mechanical interlock to achieve 'five-protection' function.

• Complete indoor & outdoor application solution.

Service environment

Coastal area:fully sealed structure of the mechanism, professional high salt spray testing equipment to ensure long-term application in coastal areas.

Low temperature area:The solid insulated switchgear doesn't need SF6, so the potential problem caused by insulation gas being liquified under low temperature can be avoided.

Plateau area:Due to the absence of SF6, the problems caused by the big pressure difference between the inside and outside of the gas tank in high altitude areas can be avoided.

Explosion forbidden places:The switch adopts vacuum interrupter sealed with epoxy resin bushing which can prevent the gas exposure and explosion.

Basement with workers:The density of SF6 is 5 times higher than air on the same condition. So if the SF6 in a traditional RMU leaks out, it will accumulate in low area, so the workers there could be harmed or suffocated.

Frequent switching operation situation: Switch operations for solid dielectric designed RMU reaches 20,000 times.

Areas with high requirements for environmental protection: Our doesn't contain SF6, which is a kind of greenhouse gas.

Other supplier products

	BKXGN-12 Solid Insulated Switchgear	Product Description BKXGN-12 is suitable for middle voltage power distribution system with a rated voltage of less than 10kV and a rated current u...
	Outdoor type Cable Branch Box 10KV/20KV	Product Description 10KV/20KV It is a kind of cable chemical equipment widely used in power distribution network system in recent years. The mai...
	BKV3(VS1)-12KV vacuum circuit breaker	Product Description BKV3-12 is an indoor switchgear with three-phase, rated voltage of 12kV, control and protection for industrial and mining ente...
	LW34-12 10KV outdoor SF6 circuit breaker	Product Description LW34-12 10KV is a new outdoor high-voltage electrical arcing and SF6 gas as insulating medium. The operating mechanism point...
	S11-M Power Transformer	S11-M Product Description S11-M a new generation of low noise and low loss transformer developed in recent years. The reel core fully sealed p...

Same products

	330037 Communication Unit Change-Over Table HS50 Original Used	Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd.	pantallas china brand bearing bearing supplier mobil dte 10 Reflow Wave Soldering Chain Cleaner T...
	GF6018A CLAMP TYPE MULTIMETER CALIBRATOR	Seller: 782364	This GF6018A high precision multi-product calibrator is compliance with national verification reg...
	GF6018A CLAMP TYPE MULTIMETER CALIBRATOR	Seller: 782364	DESCRIPTIONThe GF6018A clamp type multimeter calibrator with RS-232 port, it can be connected w...
	GF6018A CLAMP TYPE MULTIMETER CALIBRATOR	Seller: 782364	This GF6018A high precision multi-product calibrator is compliance with national verification reg...
	GF6018A CLAMP TYPE MULTIMETER CALIBRATOR	Seller: 782364	APPLICATION ■ Power plant; ■ Universities; ■ Panel manufacturer; ■ Research institutes; ■ Electr...