Strain Clamp / Dead End Clamp for ADSS
COMPONENT
inner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc.
CHARACTERISTIC
1. Stress is distributed equally, without stress focus. It can protect optical cabl-es very well.
2. Under the condition of not exceeding the intensity of cable's side pressure, it has higher grip power for the cable, and can support higher tensile force.
3. The grip power for the cable is not less than 95% of rating's pulling resisting intensityof the optical cable, completely satisfying the needs of setting up the cable.
CONDITIONS FOR THE USAGE
1. Terminal poles/towers;
2. Poles/towers with corner angles greater than 25°
3. Conjoint poles/towers of the optical cables or poles/towers with larger differences in terms of height.
INTENSITY
According to the requirement of customers, 30kN, 70kN, 100kN, 120kN, etc, can be supplied.
Description
| Model |
Grip(KN) |
Suggested Span(m) |
Length of Inner Armor Rods(mm) |
Length of Outer Armor Rods(mm) |
Estimated Weight (KG) |
Color |
| ANZ-16-* * |
16 |
100 |
1300 |
1000 |
2.7 |
Yellow |
| ANZ-25-* * |
25 |
101 -200 |
1700 |
1300 |
3.4 |
Yellow |
| ANZ-30-*# |
30 |
201 -300 |
1900 |
1500 |
3.9 |
Yellow |
| ANZ-40-*# |
40 |
301 -400 |
2100 |
1700 |
4.1 |
Yellow |
| ANZ-50-*# |
50 |
401 -500 |
2300 |
1900 |
4.5 |
Yellow |
| ANZ-60-*# |
60 |
501 -600 |
2200 |
1700 |
4.8 |
Yellow |
| ANZ-70-*# |
70 |
601 -800 |
2700 |
2200 |
5.0 |
Yellow |
| ANZ-80-*# |
80 |
801 -1000 |
2800 |
2400 |
5.5 |
Yellow |
NOTE**representing the outer diameter of the optical cable (mm).
Other supplier products
|
|
Strain Clamp / Dead End Clamp for ADSS |
COMPONENTinner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc.CHARACTERISTIC1. Stress is distributed... |
|
|
Galvanized Vibration Damper for Opgw Cable |
Vibration Dampers for OPGW (4D)COMPONENTzincification hammerhead, zincification steel armor rods, aluminum alloy clamp, stainless steel bolt etc.FU... |
|
|
Preformed Armor Rods |
PROTECTIONArmor Rods are recommended for the protection of conductors at the point of suspension and stockbradge vibration damper, on alignment or... |
|
|
Preformed Tension Clamp Equipment |
Preformed armor rods forming machine： 1.Suitable for processing the preformed strain clamp ,preformed suspension clamp and the preformed protectio... |
|
|
Aluminum Alloy Preformed Armor Rod |
FUNCTIONThe armor rods can protect the optical cable by preventing the vibration damper aluminum clamp from nipping directly onto the OPGW cables t... |
All supplier products
Same products
