Galvanized Vibration Damper for Opgw Cable
Vibration Dampers for OPGW (4D)
COMPONENT
zincification hammerhead, zincification steel armor rods, aluminum alloy clamp, stainless steel bolt etc.
FUNCTION
It eliminates or reduces the vibrations caused by many factors during the cable operations, and protects the cables and hardware fittings.
Description
Model |
Size of Aluminum Clamp(mm) |
Range of Clamping Length(mm) |
Total Length L(mm) |
Length of Clamp (mm) |
Height of Clamp (mm) |
Diameter of Steel Armor Rods(mm) |
Weight(KG) |
4D-40 |
34 |
34.0-29.5 |
542 |
66 |
94 |
11 |
4.7 |
30.5 |
30.5-27.0 |
96 |
27.6 |
27.6-24.5 |
98 |
4D-30 |
27 |
27.0-22.5 |
383 |
52 |
70 |
9 |
2.5 |
23.4 |
23.4-19.5 |
72 |
20.3 |
20.3-16.5 |
73 |
4D-20 |
18 |
18.0-15.0 |
330 |
52 |
65 |
7.5 |
1.4 |
16 |
16.0-13.3 |
63 |
14 |
14.0-12.2 |
62 |
CHARACTERISTIC
It adopts typical Hello's design. Frequency protection is distributed enough to the range of 6Hz -150Hz wide frequency zone. And in this range, there are four resonance frequencies.
FACTOR OF VIBRATION
Length of span, tensile magnitude, wind speed, wind direction, landform, and the structure and size of the cable.
NOTEThe aluminum clamps for 4D—20 are 27.0, 23.4, 20.3, 18.0, 16.0, 14.0
The aluminum clamps for 4D—30 are 27.0, 23.4, 20.3, 1 8.0, 16.0, 1 4.0
Other supplier products
|
Overhead Line Fittings for Electric Power |
MaterialDead-ends:High-tensile galvanized steel.ApplicationSuited for the full tensioning of groundwire or staywire on transmission and distributr... |
|
Cable Guy Grip Dead End |
Dead-ends are designed to hold insulated cables and bare homogeneous cables in transmission and distribution construction. Mechanical strength for ... |
|
Cable Top Ties/Side Ties |
FunctionDistribution ties are designed for securing conductors in the top groove of rigid insulators vertically mounted.This specific distribution ... |
|
Spiral Vibration Damper for Opgw Cable |
FUNCTIONIt eliminates or reduces the vibrations that come from the effect of laminar flow wind, and prevents damage of the hardware fittings and t... |
|
Single & Double Suspension Clamps for Opgw Optical Cable |
COMPONENTinner armor rods, outer armor rods, rubber clamp piece, cover shell, right-angle hanging loop, U-shaped hanging loop, bolt, nut, gasket e... |
All supplier products
Same products