Sintered Copper Bearing
Sintered bearing, also named oil impregnated bearing, is made by powder metallurgy technology, which is pressed by the mould and do sintering, coining, then it will be soaked in the lubricating oil in vacuum, it is porous structure, and oil impregnated. Advantage:1.Self-lubricating and maintenance-free2.Corrosion resistant and wear resistant3.Good thermal conductivity4.Suitable for dry and oil-free working condition5.High production efficiency and cost effective Sintered iron bearing Density: 5.6 - 6.5 g/cm³Oil content: 18 - 25% Sintered copper bearing Density: 6.2 – 7.4 g/cm³Oil content: 12 - 30% U.S. MPIF 35-2007 Material Standard for PM Self-lubracating BearingDesignation CodeDesignation CodeCT-1000-K19FC-0303-K10CT-1000-K26FC-0303-K12CT-1000-K37FC-0308-K16CT-1000-K40FC-0308-K22CTG-1001-K17FC-0200-K20CTG-1001-K23FC-0200-K34CTG-1001-K30FC-1000-K20CTG-1001-K34FC-1000-K30CTG-1004-K10FC-1000-K40CTG-1004-K15FC-2000-K25FCTC-3604-K16FC-2000-K30FCTC-3604-K22FC-2000-K40FCTC-3806-K14FC-0205-K20FCTC-3806-K22FC-0205-K35F-0000-K15FC-0208-K25F-0000-K23FC-0208-K40F-0005-K20FC-0508-K35F-0005-K28FC-0508-K46F-0008-K20FC-2008-K44F-0008-K32FC-2008-K46 U.S. MPIF 35-2007 Material Standard for PM Structural PartsDesignation CodeDesignation CodeDesignation CodeF-0000-10FC-0205-35FC-0808-45F-0005-15FC-0205-40FC-1000-20F-0005-20FC-0205-60HTFN-0200-15F-0005-25FC-0205-70HTFN-0200-20F-0005-50HTFC-0205-80HTFN-0205-20F-0005-60HTFC-0208-30FN-0205-25F-0008-20FC-0208-40FN-0205-80HTF-0008-25FC-0208-50FN-0205-105HTF-0008-30FC-0208-50HTFN-0208-30F-0008-55HTFC-0208-65HTFN-0208-35F-0008-65HTFC-0208-80HTFN-0208-80HTF-0008-75HTFC-0505-30FN-0208-105HTFC-0200-15FC-0505-40FN-0405-80HTFC-0200-18FC-0505-50FN-0405-105HTFC-0200-21FC-0508-40FN-0408-34FC-0200-24FC-0508-50FN-0408-45FC-0205-30FC-0508-60
Other supplier products
|
|
Piston |
We produce various types of connecting rod, piston, valve plate for piston compressor in household air conditioner, car air conditioner and refrige... |
|
|
Shock Absorber Rod Guide |
Shock absorber rod guide is made by powder pressing and sintering (Powder Metallurgy) technology.Some types will be inserted red PTFE DP4 sliding b... |
|
|
Sintered Iron Bearing |
Sintered bearing, also named oil impregnated bearing, is made by powder metallurgy technology, which is pressed by the mould and do sintering, coin... |
|
|
Sintered CuFe Bearing |
Sintered bearing, also named oil impregnated bearing, is made by powder metallurgy technology, which is pressed by the mould and do sintering, coin... |
|
|
Pinion Gear |
When we intend to change the machining process to PM,Website:, we need to consider 4 questions: 1. The quantity is big enough to ensure the inv... |
All supplier products
Same products
