Graphite Electrodes
Description:
Graphite electrodes serve to transfer the electrical energy from the power supply to the steel melt in the EAF bath. They are typically made using premium petroleum needle coke, coal tar pitch, and some additives.
Graphite electrodes consumption varies between 1.8 and 9.9 kg/t of liquid steel depending on the process characteristics and electrode quality. The electrode consumption in Germany in 2010 was approximately 1.1 kg per ton as a result of the reduction of time between the taps to 40 min and consequently the lower electricity consumption (345 kWh/t). Graphite electrodes are classified as regular grade or premium grade on the basis of their physical properties.
Specification:
| Specification |
Units |
Amounts |
| Ash |
wt. −% |
0.2 |
| Apparent density |
g/cm3 |
1.6–1.72 |
| Porosity |
% |
22–28 |
| Transverse strength |
N/mm2 |
9–13.8 |
| Young Modulus |
× 103N/mm2 |
6.21–9.66 |
| Electrical resistance |
× 106Ω.mm |
45.7–83.8 |
| Coefficient of thermal expansion (CTE) |
× 10−6/°C |
2.16–3.2 |
Other supplier products
|
|
Carbon Brushes For Elevator |
Our elevator carbon brushes specialist helps you find products suitable for your specific application. We will recommend the best elevator carbon ... |
|
|
Graphite Mold For Melting Glass |
Main Feature:Graphite mold for melting glass using high-purity, high-strength, high-density graphite materials, equipped with excellent experts an... |
|
|
Graphite Ingot Mould For Nonferrous Melting |
Graphite ingots for non-ferrous metal smelting are used to melt various metals (brass, copper, gold, silver, aluminum) and provide consistent perf... |
|
|
Graphite Heat Exchanger |
Product DescriptionGraphite heat exchanger is made from vibration-molded,carbonized and graphitized under precise technical control.Usually machin... |
|
|
Graphite Shaft |
Graphite Rotor And Shaft For Aluminum Smelting:
Density is generally default to 1.7g / cm3, our graphite rotor after antioxidant treatment density... |
All supplier products
Same products
