Graphite Electrodes
Description:
Graphite electrodes serve to transfer the electrical energy from the power supply to the steel melt in the EAF bath. They are typically made using premium petroleum needle coke, coal tar pitch, and some additives.
Graphite electrodes consumption varies between 1.8 and 9.9 kg/t of liquid steel depending on the process characteristics and electrode quality. The electrode consumption in Germany in 2010 was approximately 1.1 kg per ton as a result of the reduction of time between the taps to 40 min and consequently the lower electricity consumption (345 kWh/t). Graphite electrodes are classified as regular grade or premium grade on the basis of their physical properties.
Specification:
| Specification |
Units |
Amounts |
| Ash |
wt. −% |
0.2 |
| Apparent density |
g/cm3 |
1.6–1.72 |
| Porosity |
% |
22–28 |
| Transverse strength |
N/mm2 |
9–13.8 |
| Young Modulus |
× 103N/mm2 |
6.21–9.66 |
| Electrical resistance |
× 106Ω.mm |
45.7–83.8 |
| Coefficient of thermal expansion (CTE) |
× 10−6/°C |
2.16–3.2 |
Другие товары поставщика
|
|
Graphite Shaft |
Graphite Rotor And Shaft For Aluminum Smelting:
Density is generally default to 1.7g / cm3, our graphite rotor after antioxidant treatment density... |
|
|
Graphite Electrodes |
Description:
Graphite electrodes serve to transfer the electrical energy from the power supply to the steel melt in the EAF bath. They are typical... |
|
|
Carbon Brushes For Automotive |
Carbon brushes for automotive is an important motor component, conducting current between fixed conductor and moving parts, providing continuous p... |
|
|
Graphite Pipe |
Descriptionof graphite pipe:1.According to the quench acute thermal using conditions of graphite pipe, we will specially design the production pr... |
|
|
Graphite Crucible For Melting Precious Metals |
Graphite crucible for melting precious metals are made from high quality bonded graphite and pre-grade materials and are designed to handle temper... |
Все товары поставщика
Похожие товары
