SRS Supplemental Restraint System
SRS supplemental restraint systemconsists of an airbag and an inflating mechanism to form an integral airbag module, a collision supplemental restraint systemthat senses collisions and sends deployment commands to the airbag module, and a wire harness that transmits signals from the airbag sensor. This supplementary restraint systemfrom MAPMS has features of good collision recognition performance, collision energy absorption performance is highly matched to reduce injuries to drivers and passengers, also a prominent warning sign to avoid unnecessary false deployment of the airbag. We also manufacture custom airbag clock spring for your selections.
How Does The SRS Supplemental Restraint System Work?
During the driving process, the srs supplemental restraint system continuously sends speed change information to the control device, and the control device analyzes and judges the information. When the measured acceleration, speed change or other indicators exceed the predetermined value, the supplementary restraint systems sends an ignition command to the gas generator. An explosion reaction occurs, and a large amount of gas is released to fill the collision air bag, and the upper vent hole damps and absorbs the collision energy to protect the occupants. The supplementary restraint systems is a passive safety protection system that works with seat belts to provide occupants with effective crash protection.
SRS Supplemental Restraint System Introductions
The supplemental restraint system consists of collision sensor system, airbag module and wiring harness system. When the collision sensor detects the collision, the relevant supplementary restraint systems will judge the degree of the collision and decide whether to trigger the inflatable device, which usually consists of a gas generating agent and an ignition device to form an inflatable module. For the safety of disposal, the airbag is usually detonated only at high temperature. Because the impact process time of car auto spares is very short, the airbag general takes about 25-35 milliseconds from the trigger to the completion of the inflation process and inflating for too long will lose its effectiveness.
If you need any kinds of auto spares, please contact us, as a professional auto spares suppliers, MAPMS is willing to offer you high quality products.
Send product request
Other supplier products
 |
Ignition Coil Rubber Boots | MAPMS supplies car rubber boots for COP and pencil ignition coils, which is made of high-quality silicone, and with withstand high pressure over 40... |
 |
Distributor Ignition Coils | An ignition system with a distributor generates high-voltage electricity from an ignition coil, and the distributor distributes the high-voltage el... |
 |
Auto Car Thermal Expansion Valves | The auto ac expansion valve of the automotive air conditioner is installed at the entrance of the evaporator, and has two main functions. Throttle... |
 |
Electric Engine Oil Pumps | The electric engine oil pump is used to increase the oil pressure and help the oil reach other lubricated parts from the oil pan in the lubricating... |
 |
Variable Valve Timing Solenoids | VVT solenoid controls the left and right movement of the slide valve according to the duty cycle signal provided by the engine ECU, so as to contro... |
Same products
 |
Injection Pump Delivery Valves K49 | Seller: 828487 | Injection Pump Delivery Valves K49 China lutong is a manufacturer specialist in diesel engine ... |
 |
Injection Pump Delivery Valves K34 | Seller: 828487 | Injection Pump Delivery Valves K34 China lutong is a manufacturer specialist in diesel engine pa... |
 |
Injection Pump Delivery Valves K28 | Seller: 828487 | Injection Pump Delivery Valves K28 China lutong is a manufacturer specialist in diesel engine ... |
 |
Common Rail Injector Valve F00R J01 704 | Seller: 868983 | Common Rail Injector Valve F00R J01 704 David Chen |
 |
Common Rail Injector Valve F00R J01 692 | Seller: 868983 | Common Rail Injector Valve F00R J01 692 David Chen |
