SRS Supplemental Restraint System
SRS supplemental restraint systemconsists of an airbag and an inflating mechanism to form an integral airbag module, a collision supplemental restraint systemthat senses collisions and sends deployment commands to the airbag module, and a wire harness that transmits signals from the airbag sensor. This supplementary restraint systemfrom MAPMS has features of good collision recognition performance, collision energy absorption performance is highly matched to reduce injuries to drivers and passengers, also a prominent warning sign to avoid unnecessary false deployment of the airbag. We also manufacture custom airbag clock spring for your selections.
How Does The SRS Supplemental Restraint System Work?
During the driving process, the srs supplemental restraint system continuously sends speed change information to the control device, and the control device analyzes and judges the information. When the measured acceleration, speed change or other indicators exceed the predetermined value, the supplementary restraint systems sends an ignition command to the gas generator. An explosion reaction occurs, and a large amount of gas is released to fill the collision air bag, and the upper vent hole damps and absorbs the collision energy to protect the occupants. The supplementary restraint systems is a passive safety protection system that works with seat belts to provide occupants with effective crash protection.
SRS Supplemental Restraint System Introductions
The supplemental restraint system consists of collision sensor system, airbag module and wiring harness system. When the collision sensor detects the collision, the relevant supplementary restraint systems will judge the degree of the collision and decide whether to trigger the inflatable device, which usually consists of a gas generating agent and an ignition device to form an inflatable module. For the safety of disposal, the airbag is usually detonated only at high temperature. Because the impact process time of car auto spares is very short, the airbag general takes about 25-35 milliseconds from the trigger to the completion of the inflation process and inflating for too long will lose its effectiveness.
If you need any kinds of auto spares, please contact us, as a professional auto spares suppliers, MAPMS is willing to offer you high quality products.
在线联系供应商
Other supplier products
Oil Level Sensors | The oil sensor level is used to accurately measure the oil level, oil temperature and engine oil state, is installed in the oil pan of the engine. ... | |
Automotive Sensors | Sensor for automotiveis the input device of automotive computer system. It converts information of various working conditions, such as vehicle spee... | |
Rear Wiper Blades | The rear wiper blade armis the wiper of the rear windshield of the vehicle, which is usually equipped on SUVs, MPVs, hatchbacks. The influence of h... | |
LED Headlight | For automobiles, led head light bulbsSources to have the advantages of energy-saving, low cost, long life, good durability, the small size of LED c... | |
Car Knock Sensors | The car aftermarket knock sensoris an AC signal generator, which can detect the speed and position of the rotating shaft, vibration or mechanical p... |
Same products
Armored Door Locks | 卖方: Wuyi Jiamin Locks Co., Ltd | JM-55 Door handles Entrance 1, Material: Iron plate+ aluminum lever2, Center distance: 68mm3, P... | |
WATSILA L20 油嘴 柱塞 | 卖方: 双成国际有限公司 | 秦皇岛双晟机械有限公司,供应WARTSILA L20船用柴油机配件。 主要配件:油嘴,柱塞,出油阀,缸盖,缸套,连杆,活塞,活塞环,连杆螺栓,轴瓦进气阀,排气阀,阀座,指示阀,油管,喷油器,高... | |
MAN 16/24, 21/31,23/30船用柴油机配件 | 卖方: 双成国际有限公司 | 秦皇岛双晟机械有限公司,专业为客户提供原厂及OEM厂生产的高速、中速、低速船用柴油机设备及备件,图纸器、空压机、分机、油泵、水泵、水泵、仪器仪表等 主要品牌:MAN 、PIELSTICK DA... | |
High Voltage PTC Heater for Electric Vehicle | 卖方: Shanghai Pake Thermistor Ceramics Co., Ltd. | Application:It is used to heating the airCharacteristic description :High heating speedDual heati... | |
Solid Tire For Mini Wheel Loader | 卖方: Zhejiang Tongchao Industry and Trade Co., Ltd. | Solid Tire For Mini Wheel Loader() It is composed of low heating and cutting-resistant materials... |