.

HMHG Series Harmonic Drive Hat Type

The flexspline belongs to hollow flanging standard structure, compact design, zero backlashes, coaxial output and input, excellent positioning accuracy, and rotation accuracy. Contact harmonic drive companyHan's Motion for more information.

HMHG Series Harmonic Drive Hat Type List

HMHG-Ⅰ Series Unit (Hollow Shaft) Harmonic Gearing

With compact hollow shaft and a robust cross roller bearing which enables the output flange to mount the loads directly without additional supports, ensuring a simple and space-saving design. Light weight is very important for some applications, HMHG-I-LW is available for lightweight solution. HMHG-I is available in 6 size with ratios from 50:1 to 160:1.

HMHG-Ⅱ Simple Unit (Flat) Series Harmonic Gearing

Input shaft connects with an inner hole of wave generator through Oldham coupling, flat shape, and standard structure

HMHG-Ⅱ-E Simple Unit (Flat & Integral Cam) Series Harmonic Gearing

Compared with HMCG-II, wave generator with integrated cam for HMCG-II-E. The integrated output cross roller bearing with high titling capacity enables the output flange to mount the loads directly without additional supports, ensuring a simple and space-saving design. The absence of input and output flanges features a fabulous flexible design. HMHG-II is available in 6 size with ratios from 50:1 to 160:1.

HMHG-Ⅲ Simple Unit Flat Hollow Shaft Series Harmonic Drive

High torque simplicity series with a hollow input shaft, the absence of input and output flanges features a fabulous flexible design. HMHG-III is available in 6 size with ratios from 50:1 to 160:1.

HMHS-IV Unit (Shaft Input) Series Harmonic Gearing

The integrated output cross roller bearing with high titling capacity enables the output flange to mount the loads directly without additional supports, ensuring a simple and space-saving design. Fully sealed and easy to mount to motor. Performs fantasy on bevel gears and synchronous belt device applications.

HMHG-V Unit (Hollow & Long Shaft) Series Harmonic Gearing

With input shaft can mount to motor directly. Low speed hollow shaft through supply lines, shafts or cables. Encoder can be mounted to both input and output shaft. Especially for Cobots and the device with joint modular.

Design Guide Of HMCG Series Harmonic Drive Cup Type

In Order To Give Full Play To The Performance Of Harmonic Reducer, Please Pay Attention To The Follo

Make the input shaft, circular spline, output shaft, and shell concentric.

Wave generators can produce axial force. Please make the input shaft into some structure that can support the force.

Since the harmonic reducer is a small device that can transmit larger torque, please adopt suitable tightening torque to tighten the screw that connects the flex spline with the output shaft.

Flexspilne can have elastic deformation, so please adopt the recommended size to design the inner wall of the shell.

Input shaft and output shaft must adopt matched bearings (leave space for 2 - point support) and the structure that can bear radial load and axial load. Please do not exert too much force on the wave generator and flex spline.

Make sure the flange diameter of the flex spline does not exceed the wheel bore diameter of the flex spline and process fillet on the flange that connects the diaphragm. Please adopt the recommended size to design all parts.

Use a C-shape clamp ring to fix the hub of the wave generator and make sure the hook of the clamp ring does not touch the flex spline or wave generator.

Design Guide Of HMCG Series Harmonic Drive Cup Type

How Do You Calculate The Gear Ratio On A Harmonic Drive?

Calculating the gear ratio on a Harmonic Drive involves understanding the structure and components of the drive. The gear ratio is determined by the number of teeth on the circular spline, flexspline, and wave generator. To calculate it, divide the number of teeth on the circular spline by the number of teeth on the flexspline. This ratio represents the speed reduction or multiplication achieved by the Harmonic Drive. It's important to note that the gear ratio can be further influenced by the specific design and configuration of the Harmonic Drive.

What Is The Transmission Ratio Of Harmonic Drive?

The transmission ratio of a Harmonic Drive, also known as the gear ratio or reduction ratio, is determined by the number of teeth on the circular spline, flexspline, and wave generator. The gear ratio represents the speed reduction or multiplication achieved by the Harmonic Drive. In a typical Harmonic Drive, the gear ratio can range from 30:1 to 320:1, or even higher in specialized versions. This means that for every rotation of the input shaft, the output shaft rotates a certain number of times determined by the gear ratio. The specific gear ratio of a Harmonic Drive depends on the configuration and specifications of the particular model, we have model for harmonic gear drive reducer, check for more information with this link.

If you want to know more types of power drive gearbox, please visit our website.



Send product request

To: Shenzhen Han\\\'s Motion Technology CO.,Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

HMCD Series Harmonic Drive Cup Type
HMCD Series Harmonic Drive Cup Type HMCD Series Harmonic Drive Cup Type HMCD is Ultra-flat harmonic drive china, with characteristics as compact and lightweight, input and output coax...
Harmonic Drive Applications
Harmonic Drive Applications Harmonic Drive Applications Cover the intelligent manufacturing industry and meet the requirements of different markets and application fields, su...
HMCG Series Harmonic Drive Cup Type
HMCG Series Harmonic Drive Cup Type HMCG Series Harmonic Drive Cup Type HMCG Series is cup type of harmonic drive, it has the characteristics of compact and concise design, no backla...
HMCD-Ⅱ Unit (Super Flat) Series Harmonic Gearing
HMCD-Ⅱ Unit (Super Flat) Series Harmonic Gearing HMCD-Ⅱ Unit (Super Flat) Series Harmonic Strain Wave Gearing HMCD-II series, with a commitment to lightweight and compact size of harmonic gear tr...
HMHG-Ⅲ Simple Unit Flat Hollow Shaft Series Harmonic Drive
HMHG-Ⅲ Simple Unit Flat Hollow Shaft Series Harmonic Drive HMHG-III series flex spline belongs to the hollow flanging standard structure and the whole structure is compact, it is also a kind of the HMHG Ser...
All supplier products

Same products

Harmonic Drive Applications
Harmonic Drive Applications Seller: Shenzhen Han\\\'s Motion Technology CO.,Ltd Harmonic Drive Applications Cover the intelligent manufacturing industry and meet the requiremen...
Robot Gearbox And Harmonic Drives In Robotics
Robot Gearbox And Harmonic Drives In Robotics Seller: Shenzhen Han\\\'s Motion Technology CO.,Ltd robot planetary gearbox robot speed reducer harmonic robot Robot Gearbox And Harmonic Drives...
HMHG Series Harmonic Drive Hat Type
HMHG Series Harmonic Drive Hat Type Seller: Shenzhen Han\\\'s Motion Technology CO.,Ltd HMHG Series Harmonic Drive Hat Type The flexspline belongs to hollow flanging standard structure...
HMHG-Ⅰ Series Unit (Hollow Shaft) Harmonic Gearing
HMHG-Ⅰ Series Unit (Hollow Shaft) Harmonic Gearing Seller: Shenzhen Han\\\'s Motion Technology CO.,Ltd HMHG-Ⅰ Series Unit (Hollow Shaft) Harmonic Gearing HMHG-I series flexspline belongs to the hollo...
HMHG-Ⅱ Simple Unit (Flat) Series Harmonic Gearing
HMHG-Ⅱ Simple Unit (Flat) Series Harmonic Gearing Seller: Shenzhen Han\\\'s Motion Technology CO.,Ltd HMHG-Ⅱ Simple Unit (Flat) Series Harmonic Gearing HMHG-II series flex spline belongs to the holl...