NEMA 23D SQUARE STEPPER MOTOR
NEMA23 Motor Controller
size 23 stepper motorsis a standard hybrid stepper motor, the step angle is 1.8°.
NEMA 23CURRENTSQUARE STEPPER MOTOR CHARACTERISTIC PARAMETER
|
STEP ANGLE |
|
|
2 |
|
|
RATED VOLTAGE |
|
|
RATED CURRENT |
|
|
RESISTANCE |
|
|
INDUCTANCE |
|
|
HOLDING TORQUE |
|
|
RUNNING TORQUE(AT --PPS) |
--V.DC, --A/PHASE |
|
DIELECTRIC STRENGTH |
500V A.C/MIN. |
|
INSULATION RESISTANCE |
100MΩ+/MIN. |
|
INSULATION CLASS |
CLASS B |
|
TEMPERATURE RISE |
80K MAX. |
|
ROTOR INERTIA |
280 g.cm²(1.53 oz.in²) |
|
WEIGHT |
|
|
ALLOWABLE THRUST LOAD |
15N |
|
ALLOWABLE RADIAL LOAD |
75N(ON THE SHAFT END) |
|
OPERATION AMBIENT TEMP. |
‘-20℃---+50℃ |
|
OPERATION AMBIENT HUM. |
15%----90% |
|
LIFE |
5000HOURS |
NEMA 23D SQUARE STEPPER MOTOR TORQUE CURVE
SPEED VS TORQUE CURVE
MODEL: HEM-23D4401-45
LOT NO.: 2021-10-23
|
VOLTAGE |
○ |
SUPPLY |
WINDING |
||
|
CURRENT |
○ |
PEAK |
AVE |
||
|
EXCITATION |
Full step |
||||
|
DRIVE CIRCUIT |
DM542 |
UNIPOLAR |
# |
BIPOLAR |
|
|
INERTIA LOAD |
3g-cm2 |
If you want to know more about nema 23 high speed, please visit our website.
Now the price of stepper motor materialis affordable, if you have needs to buy stepper motor, please leave us a message.
Send product request
Other supplier products
 |
NEMA 34R ROUND STEPPER MOTOR | NEMA34 motoris a round stepper motor. The front cap is 86*86, but the motor body is round. NEMA 34ROUND STEPPER MOTOR BODY SIZE NEMA 34 PO... |
|
|
NEMA 23D SQUARE STEPPER MOTOR | NEMA23 Motor Controller size 23 stepper motorsis a standard hybrid stepper motor, the step angle is 1.8°. NEMA 23CURRENTSQUARE STEPPER MOTO... |
 |
NEMA 24T SQUARE STEPPER MOTOR | NEMA 24 motoris a standard hybrid stepper motor, the step angle is 1.8°, but it is a 3-phase one. NEMA 24T SQUARE STEPPER MOTOR BODY SIZE ... |
 |
SIDE SEALER | Guonuo's side sealeris ideal for medium speed, providing excellent performance and high cost-efficiency with the function of film feeding punching,... |
 |
MOTOR ENCODER | Encoders are mainly used to feedback on the closed-loop system such as motor running position and winding number. Common encoders are divided into ... |
