HMHG-V Unit (Hollow & Long Shaft) Series Harmonic Drive
HMHG-V Series with hat-combination standard structure. The input shaft can connect with the motor directly. The cable can go through the low-speed hollow shaft Encoder can be installed on both input and output shafts Especially for Cobot and Joint modular
Features of HMHG-V Unit (Hollow & Long Shaft) Series Harmonic Drive
The cable can go through the hollow shaft, safer and more reliable
Doubled torque/volume ratio, as well as modular design, make it more compact with motor
No Backlash
Excellent positioning accuracy and rotation accuracy
Run out is smaller for install position of motor and encoder
30%higher torque capacity than the HMHS series
43%longer lifetime than the HMHS series
Parameters of HMHG-V Unit (Hollow & Long Shaft) Series Harmonic Drive
|
Model |
Reduction ratio |
Rated torque at input 2000r/min |
Permissible peak torque at start/stop |
Permissible max.value of ave.load torque |
Instantaneous permissible max. torque |
Permissible max.input rotational speed |
Permissible ave. input rotational speed |
Backlash (arc sec) |
Transmission accuracy (arc sec) |
|
Nm |
Nm |
Nm |
Nm |
r/min |
r/min |
W |
W |
||
|
14 |
50 |
7 |
23 |
9 |
46 |
8000 |
3500 |
20 |
90 |
|
80 |
10 |
30 |
14 |
51 |
20 |
90 |
|||
|
100 |
10 |
36 |
14 |
70 |
10 |
90 |
|||
|
17 |
50 |
21 |
44 |
34 |
91 |
7000 |
3500 |
20 |
90 |
|
80 |
29 |
56 |
35 |
113 |
20 |
90 |
|||
|
100 |
31 |
70 |
51 |
143 |
10 |
90 |
|||
|
20 |
50 |
33 |
73 |
44 |
127 |
6000 |
3500 |
20 |
60 |
|
80 |
44 |
96 |
61 |
165 |
20 |
60 |
|||
|
100 |
52 |
107 |
64 |
191 |
10 |
60 |
|||
|
120 |
52 |
113 |
64 |
161 |
10 |
60 |
|||
|
25 |
50 |
51 |
127 |
72 |
242 |
5500 |
3500 |
20 |
60 |
|
80 |
82 |
178 |
113 |
332 |
20 |
60 |
|||
|
100 |
87 |
204 |
140 |
369 |
10 |
60 |
|||
|
120 |
87 |
217 |
140 |
395 |
10 |
60 |
|||
|
32 |
50 |
99 |
281 |
140 |
497 |
4500 |
3500 |
20 |
60 |
|
80 |
153 |
395 |
217 |
738 |
10 |
60 |
|||
|
100 |
178 |
433 |
281 |
841 |
10 |
60 |
|||
|
120 |
178 |
459 |
281 |
892 |
10 |
60 |
|||
|
40 |
50 |
178 |
523 |
255 |
892 |
4000 |
3000 |
10 |
60 |
|
80 |
268 |
675 |
369 |
1270 |
10 |
60 |
|||
|
100 |
345 |
738 |
484 |
1400 |
10 |
60 |
|||
|
120 |
382 |
802 |
586 |
1530 |
10 |
60 |
Now the price of power weeder gearboxis low, anything you need, please leave us a message.
As one of harmonic drive manufacturers, we can offer sorts of related products for sale, if you have needs to buy harmonic drive, please leave us a message.
Send product request
Other supplier products
 |
HMHD Series Harmonic Drive Hat Type | Simple combination type (super flat hollow shaft), pursuing flat structure to the extreme, suitable for the application with the requirement on fla... |
 |
HMCG-Ⅱ Series Unit Harmonic Drive | HMCG-II series flex spline belongs to a cup-shaped standard structure and its input shaft connects with the inner hole of the wave generator throug... |
 |
HMHG-Ⅱ Simple Unit (Flat) Series Harmonic Gearing | HMHG-II series flex spline belongs to the hollow flanging standard structure and the whole structure is compact. Its input shaft connects with the ... |
 |
HMHD-Ⅲ Simple Unit (Super Flat & Hollow Shaft) Series Harmonic Gearing | HMHD-III series is the type pursuing flat structure to the extreme. Its axial length is half of that of the HMHS series. The flexspline adopts an u... |
 |
Buy Harmonic Drive | Through big data modeling, simulation optimization and performance verification, harmonic drive actuatorcompany PICEA Motion team realizes the opti... |
Same products
 |
HMCG-Ⅱ Series Unit Harmonic Gearing | Seller: Shenzhen Han\\\'s Motion Technology CO.,Ltd | HMCG-Ⅱ Series Unit Harmonic Gearing HMCG-II series flex spline belongs to a cup-shaped standard ... |
 |
HMHS-IV Unit (Shaft Input) Series Harmonic Gearing | Seller: Shenzhen Han\\\'s Motion Technology CO.,Ltd | HMHS-IV Unit (Shaft Input) Series Harmonic Gearing HMHG-IV series flex spline belongs to the hol... |
 |
HMHG-V Unit (Hollow & Long Shaft) Series Harmonic Gearing | Seller: Shenzhen Han\\\'s Motion Technology CO.,Ltd | HMHG-V Unit (Hollow & Long Shaft) Series Harmonic Gearing HMHG-V Series with hat-combination... |
 |
HMCG Series Harmonic Drive Cup Type | Seller: Shenzhen Han\\\'s Motion Technology CO.,Ltd | HMCG Series Harmonic Drive Cup Type HMCG Series is cup type of harmonic drive, it has the charac... |
 |
HMCG-Ⅰ Series Component Harmonic Gearing | Seller: Shenzhen Han\\\'s Motion Technology CO.,Ltd | HMCG-Ⅰ Series Component Harmonic Gearing HMCG-I consists of three basic components: flexible gea... |
