Principle and Advantage of Microcentrifuge Tube
Centrifuge test tube is a tubular sample container, which can be sealed or capped. It is the use of centrifugal technology to produce strong centrifugal force when the object rotates at high speed so that the suspended particles placed in the rotating body can settle or float so that some particles can achieve the purpose of concentration or separation from other particles.
- microcentrifuge principleand Its Advantages
The low adsorption microcentrifuge Tubehas a very good seal, which can provide safety for the daily operation of the experimental personnel, especially in the need of heating experiments. In order to meet the standard of medical laboratory consumables, higher experimental requirements can be applied. If cap and poor coordination between the Centrifuge Test Tube, un-tight seal, is easy to cause the Centrifuge Test Tube spill, leak, corrosion centrifuge, affect the service life and for containing volatile components of a liquid, volatile organic compounds were also easy to cause loss, the influence of each component content in Centrifuge Test Tube, then appeared deviation caused by the result of the experiment. Therefore, there should be good sealing between the tube cover and the Centrifuge Test Tube. A low adsorption microcentrifuge Tube is a small Centrifuge Test Tube, which needs to be used together with a microcentrifuge, mainly for the separation of micro reagents. In modern laboratories, a low adsorption microcentrifuge Tube is a kind of popular and widely used consumable material. Because of the limitations and effects of smaller and smaller samples, it is important to reduce and minimize the negative effects of using conventional Centrifuge Test Tube. The low adsorption microcentrifuge Tube is a special centrifuge tube that can be used to optimize the requirements of sample analysis and ensure maximum sample recovery. Because the sample concentration is small, it is necessary to reduce the sample loss for subsequent analysis.
Send product request
Other supplier products
 |
MDHC Centrifuge Tube | MDHC Centrifuge Tube Contains a large, white frosted writing area. Easy-to-read black graduations in ±2% increments. RNase-, DNase-, a... |
 |
MDHC Pipette Tips | MDHC's pipette tipsare manufactured from USP Class VI standard PP materials in Class 100,000 clean workshop. They have good transparency and high f... |
 |
MDHC Pipette Tips | MDHC's filter pipette tipsare manufactured from USP Class VI standard PP materials in Class 100,000 clean workshop. They have good transparency and... |
 |
Matters Needing Attention in the Use of Serological Pipettes | Ⅰ. Understand the serological pipette In the laboratory, serological pipettes are frequently used to transfer liquids in milliliter volumes, rangi... |
 |
MDHC Deep Well Plate | MDHC 96 and 384 well plates are available in different well sizes, well shapes, and well bottom shapes to meet all your possible application needs.... |
Same products
 |
The third generation 43 series lean pipe aluminum alloy pipe | Seller: WJ-LEAN Technology Co., Ltd. | Diameter 43mm standard size 1.7mm thickness anodized aluminum alloy tube for Karakuri system.43 s... |
 |
Suction Plus Endotracheal Tube | Seller: Gcmedica Enterprise Ltd.,(Wuxi) | Enhancing Airway Management with the Suction Plus Endotracheal Tube The Suction Plus Endotrachea... |
 |
Suction Catheter | Seller: Gcmedica Enterprise Ltd.,(Wuxi) | The Essential Features of Suction Catheters for Effective Airway Clearance Disposable suction ca... |
 |
Suction Canister Soft Liner | Seller: Gcmedica Enterprise Ltd.,(Wuxi) | Enhancing Safety and Efficiency with Suction Canister Soft Liners in Healthcare Settings In heal... |
 |
Suction Bubble Tubing | Seller: Gcmedica Enterprise Ltd.,(Wuxi) | Discover the Versatile Features of Suction Bubble Tubing for Optimal Adaptability When it comes ... |
